GDPR

Mandatory cookies

Mandatory cookies enable the main website functions. Without the aforementioned cookies the website cannot function properly. These cookies can be turned off only by changing the browser settings.

Statistics cookies

Analytical cookies allow us to improve the website by collecting and providing information about its usage.

Newsletter subscription

projektai-lsd Lithuanian Standards Board
Portal for draft standards
Register

List of drafts

Extended search

till

Results

Showing:
Total records found: 159
arrow-prev 1 … 4 5 6 7 arrow-next
prEN 14509-1 Public enquiry
Comment end date 2026-10-31
Factory-made double skin metal faced insulating sandwich panels - Part 1: Self-supporting applications

This document specifies characteristics of factory-made double skin metal faced insulating sandwich panels intended to be used as elements for self-supporting applications in construction works in roofs, external and internal walls (including partitions) and in ceilings (hereafter referred to as non-structural sandwich panels). The non-structural sandwich panels consist of two faces made of: — steel; — stainless steel; — aluminium; — aluminium alloys; — copper and insulating core made of: — rigid polyurethane (PU) (see 3.1.17); — expanded polystyrene (EPS) (see 3.1.15); — extruded polystyrene foam (XPS) (see 3.1.16); — phenolic foam (PF) (see 3.1.14); — mineral wool (MW) (see 3.1.13) either by using an auto-adhesive bonding technique or by using a separate adhesive layer. Products which are — curved; — perforated (perforated faces); — used for stabilization purposes; — consisting of two or more clearly specified layers of different insulating core materials (multi-layered) or of different materials per face; — used as ceilings when fastening is under permanent tension load; — parts of clean room kits, conditioning room kits, cold storage room kits and cold storage building envelope and building kits; — reused; are excluded from this product definition. Products intended to be used for structural applications are excluded from this product definition.

Read draft and comment View
prEN 2593-001 Public enquiry
Comment end date 2026-10-31
Aerospace series — Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown — Part 001: Technical specification

The present document specifies the characteristics, installation and mounting dimensions for plug-in relay bases for use with two and four poles double throw relays in accordance with EN 2548-001. Relay bases in accordance with this document shall be used at ambient temperatures between −70 °C and 125 °C and at altitudes up to 25 000 m.

Read draft and comment View
prEN ISO 16708 Public enquiry
Comment end date 2026-10-31
Oil and gas industries including lower carbon energy - Pipeline transportation systems - Reliability-based limit state methods (ISO/DIS 16708:2026)

ISO 16708:2006 specifies the functional requirements and principles for design, operation and re-qualification of pipelines in the petroleum and natural gas industries using reliability based limit state methods as permitted by ISO 13623. Reliability-based limit state methods provide a systematic way to predict pipeline safety in design and operation. ISO 16708:2006 supplements ISO 13623 and can be used in cases where ISO 13623 does not provide specific guidance and where limit states methods can be applied, such as, but not limited to - qualification of new concepts, e.g. when new technology is applied or for design scenarios where industry experience is limited, - re-qualification of the pipeline due to a changed design basis, such as service-life extension, which can include reduced uncertainties due to improved integrity monitoring and operational experience, - collapse under external pressure in deep water, - extreme loads, such as seismic loads (e.g. at a fault crossing), ice loads (e.g. by impact from ice keels), - situations where strain-based criteria can be appropriate. ISO 16708:2006 applies to rigid metallic pipelines on-land and offshore used in the petroleum and natural gas industries.

Read draft and comment View
prEN 14731 Public enquiry
Comment end date 2026-10-29
Execution of special geotechnical works - Ground treatment by deep vibration

This document establishes general principles for the execution of soil treatment by deep vibration. The following types of treatment are covered by this document: - deep vibratory compaction to densify the ground as mentioned in EN 1997 3:2025, Annex I, Table I.1; - vibrated columns formed by inserted granular material laterally/radially compacted against the surrounding ground to form a stiff composite column-soil structure (vibrated compacted granular columns) as mentioned in EN 1997 3:2025, Annex I, Table I.2; - vibrated columns formed by inserted material developing unconfined compressive strength comprising a composite of binder and granular material (rigid columns) as mentioned in EN 1997 3:2025, Annex I, Table I.2. The following treatment methods are covered by this document: - methods in which depth vibrators, containing oscillating weights which cause horizontal vibrations, are inserted into the ground; - methods in which compaction probes are inserted into the ground using a vibrator, which remains above ground surface, and which oscillates in a vertical mode. Treatment methods are outlined in Annexes A, B, C and D. The following treatment methods, among others, are not included in this document: - dynamic compaction, dynamic replacement and other methods in which some form of treatment is applied to the ground surface; - uncompacted granular columns primarily used as drains; - explosive compaction.

Read draft and comment View
prEN ISO 8503-5 Public enquiry
Comment end date 2026-10-29
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO/DIS 8503‑5:2026)

ISO 8503-5:2017 describes a field method for measuring the surface profile produced by any of the abrasive blast-cleaning procedures given in ISO 8504-2. The method uses replica tape and a suitable gauge for measuring, on site, the roughness of a surface before the application of paint or another protective coating. The method is applicable within the range of profile heights cited for a given grade (or thickness) of replica tape. The commercial grades currently available permit measurement of average peak-to-valley profiles of 20 µm to 115 µm. The method is valid for surfaces that have been cleaned with abrasives.

Read draft and comment View
prEN ISO 17072-1 Public enquiry
Comment end date 2026-10-29
Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO/DIS 17072-1:2026)

This document specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspiration solution and subsequent determination with inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines extractable metals in leather; it is not compound-specific or specific to the oxidation state of the metals. This method is especially suitable for determining the extractable chromium in chromium-tanned leathers.

Read draft and comment View
prEN ISO 14114 Public enquiry
Comment end date 2026-10-29
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO/DIS 14114:2026)

ISO 14114:2017 applies to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the outlet connection of the main shut-off valve. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for use in welding, cutting and allied processes. ISO 14114:2017 applies to acetylene cylinder manifold systems in which acetylene single cylinders or acetylene bundles are coupled for collective gas withdrawal. NOTE National regulations exist regarding limitation of the amount of single cylinders/bundles of acetylene on a single location (e.g. in warehouse or connected to a manifold system). ISO 14114:2017 also covers a test procedure for decomposition blockers.

Read draft and comment View
prEN 18380 Public enquiry
Comment end date 2026-11-01
Water conditioning equipment inside buildings - Devices using UV LED units - Requirements for performance, safety and testing

This document specifies definitions, principles of construction, requirements and methods for testing the performance of UV devices (240 nm to 290 nm nominal) for potable water installations according to EN 806-2 which are permanently connected to the building’s supply. Devices described by this document can be installed at the point of entry (POE), within the water distribution system inside the building or at the point of use (POU). Additionally, the devices described in this document can be used in mobile or temporary potable water installations, where the system is not permanently connected to a water supply. UV devices in the sense of this document are UV bactericidal treatment devices or UV disinfection devices for one of three specified water qualities, determined by the observed UV transmittance. Devices can be standalone, integrated into a larger appliance or part of multi-staged treatment process. The document relates solely to the performance of the UV reactor.

Read draft and comment View
prEN 1931 Public enquiry
Comment end date 2026-11-01
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties

This document specifies a method for the determination of the water vapour transmission properties of waterproofing sheets. It is applicable to factory made bitumen, plastic and rubber sheets for roof waterproofing, damp proof sheets, damp proof courses, underlays and vapour control layers.

Read draft and comment View
prEN ISO 20482 Public enquiry
Comment end date 2026-11-01
Metallic materials - Sheet and strip - Erichsen cupping test (ISO/DIS 20482:2026)

ISO 20482:2013 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming. For materials that are thicker and when only narrower strips are available, tools of specified dimensions are provided, in which case subscripts are used, as shown in Table 1.

Read draft and comment View
EN ISO 683-3:2022/prA1 Public enquiry
Comment end date 2026-10-27
Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels - Amendment 1 (ISO 683-3:2022/DAM 1:2026)
Read draft and comment View
prEN ISO 21037 Public enquiry
Comment end date 2026-10-24
Adhesives - Guideline for separating adhesively bonded joints enabling repair and improving recycling (ISO 21037:2026)

This document specifies the methods commonly available for separating adhesively bonded joints enabling repair and improving recycling. This document applies to adherends made of metallic and non-metallic inorganic material, plastics including both filler-containing and fibre-reinforced types, wood and wood-based materials, coated materials, adherends of natural and polymeric fibres as well as paper and cardboard.

View
prEN 489-1 Public enquiry
Comment end date 2026-10-24
District heating pipes - Bonded single and twin pipe systems for buried hot and coldwater networks - Part 1: Joint casing assemblies and thermal insulation for hot and cold-water networks with metal service pipes in accordance with EN 13941-series.

This document specifies requirements and test methods for joint casing systems for single and twin pipes between adjacent factory-made pipe, and/or fitting and/or valve assemblies for buried heating and cooling water networks with rigid pipe systems with metal service pipes in accordance with EN 13941-1 [4] and EN 13941-2 [5] as well as rigid pipe systems with plastic service pipes according to series EN 17415 and flexible pipe systems with metal service pipes according to EN 15632-4 . NOTE There are no differences in requirements for single and twin pipe joint casing systems. For bedding materials other than those defined in 5.2.3 additional precautions are defined inEN 13941-2 [5].

Read draft and comment View
EN ISO 5367:2023/prA1:2026 Public enquiry
Comment end date 2026-10-24
Anaesthetic and respiratory equipment - Breathing sets and connectors - Amendment 1: Additional requirements for connectors for accessory access connection port (ISO 5367:2023/DAmd1:2026)

Additional requirements for connectors for accessory access connection port

Read draft and comment View
prEN ISO 11461 Public enquiry
Comment end date 2026-10-24
Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO/DIS 11461:2026)
Read draft and comment View
prEN 3766 Public enquiry
Comment end date 2026-10-24
Aerospace series - Rivet, blind, nut plate, universal head, in heat resisting steel, passivated - Metric series

This document specifies the characteristics of blind nut plate rivets with universal head, in heat resisting steel, passivated, metric series, for maximum operating temperature 650 °C .

Read draft and comment View
prEN ISO 9360-1 Public enquiry
Comment end date 2026-10-24
Heat and moisture exchangers, and breathing system filters for respired gases - Part 1: Common requirements (ISO/DIS 9360-1:2026)
Read draft and comment View
prEN ISO 9360-2 Public enquiry
Comment end date 2026-10-24
Heat and moisture exchangers, and breathing system filters for respired gases - Part 2: Measurement of moisture loss (ISO/DIS 9360-2:2026)
Read draft and comment View
prEN 2665-004 Public enquiry
Comment end date 2026-10-24
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 004: UNC thread terminals - Product standard

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 20 A to 50 A, used in aircraft on-board circuits at a temperature between −55 °C and 90 °C at an altitude of 15 000 m max. These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping They will continue to function up to the short-circuit current.

Read draft and comment View
prEN 755-8 Public enquiry
Comment end date 2026-10-27
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form

This document specifies the tolerances on dimensions and form for aluminium and aluminium alloy extruded porthole tubes with an outside diameter (OD) from 8 mm to 450 mm (round tube, see Figure 1) or with a cross section contained within a circumscribing circle (CD) from 10 mm to 350 mm (other than round tube, see Figure 2), supplied in straight lengths. The temper designations used in this part are according to EN 515. This document only applies to tube produced by the tube porthole/bridge method. This document does not apply to: — extruded tubes produced by the seamless, die/mandrel method (EN 755-7); — tubes delivered in coils (EN 13957); — coiled tubes cut to length (EN 13957). Figure 1 — Round tube Figure 2 — Circumscribing circle for other than round tube

Read draft and comment View
EN 353-2:2024/prA1 Public enquiry
Comment end date 2026-10-22
Personal fall protection equipment - Part 2: Guided type fall arresters including a flexible anchor line

This document specifies requirements, test methods, marking, manufacturer’s instructions and information and packaging for guided type fall arresters including a flexible anchor line forming a single product. This anchor line is attached to an upper anchor point for vertical and inclined applications; for horizontal applications, the anchor point can be located at the user’s foot level. Guided type fall arresters including a flexible anchor line conforming to this document are components of one of the fall arrest systems covered by EN 363:2018. Other types of fall arresters are specified in EN 353-1:2014+A1:2017 or EN 360:2023.

Read draft and comment View
prEN 15376 Public enquiry
Comment end date 2026-10-22
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

This document specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228 [5]. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V). NOTE For the purposes of this document, the term “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

Read draft and comment View
prEN 14492-2 Public enquiry
Comment end date 2026-10-22
Cranes - Power driven winches and hoists - Part 2: Power driven hoists

This document is applicable to the design, information for use, maintenance and testing of power driven hoists, compact or open construction, with or without trolleys for which the prime mover is an electric, hydraulic or pneumatic motor. They are designed for the lifting and lowering of loads that are suspended on hooks or other load lifting attachments. Hoists can be used either in cranes, in other machines, e.g. rail dependent storage and retrieval equipment, monorail conveyors or by itself. This document is applicable to the following types of hoists and applications: — rope hoists; — chain hoists; — belt hoists; — NGL building hoists; — winches used for lifting operation; — hoists designed for holding stationary loads above persons; — hoists designed for high risk applications. This document does not apply to belt hoists with steel belts as hoisting media. This document does not apply to builders’ hoists for transportation of goods having a guided platform or having a guided load carrying device. This document is not applicable to the following hazards: — this document does not cover hazards related to the lifting of persons. This document does not specify additional requirements for hazards related to the use of hoists in explosive atmospheres in underground mines. This document does not address the hazards related to autonomous operation and use of self-evolving behaviour of the power driven hoists. The significant hazards covered by this document are identified in Annex H. This document is not applicable to power driven hoists manufactured before the date of its publication.

Read draft and comment View
prEN ISO/IEC 80079-20-1 Public enquiry
Comment end date 2026-10-22
Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC DIS 80079-20-1:2026)

This document is published as a dual log standard and provides guidance on classification of gases and vapours. It describes a test method intended for the measurement of the maximum experimental safe gaps (MESG) for gas-air mixtures or vapour-air mixtures under normal conditions of temperature and pressure (20 °C, 101,3 kPa) so as to permit the selection of an appropriate group of equipment. This document also describes a test method intended for use in the determination of the auto-ignition temperature (AIT) of a vapour-air mixture or gas-air mixture at atmospheric pressure, so as to permit the selection of an appropriate temperature class of equipment. Values of chemical properties of materials are provided to assist in the selection of equipment to be used in hazardous areas. Further data may be added as the results of validated tests become available. The materials and the characteristics included in a table (see Annex B) have been selected with particular reference to the use of equipment in hazardous areas. The data in this document have been taken from a number of references which are given in the bibliography. These methods for determining the MESG or the AIT may also be used for gas-air-inert mixtures or vapour-air-inert mixtures. However, data on air-inert mixtures are not tabulated. Keywords: classification of gases and vapours, measurement of the maximum experimental safe gaps (MESG)

Read draft and comment View
prEN 18397 Archived
Comment end date 2026-10-20
Properties of carbon dioxide streams in carbon steel pipelines

This document specifies requirements for the composition of CO2 streams relevant to the integrity of carbon steel pipeline systems, including limits on non-condensable components. It establishes the framework conditions for the supply, transportation and distribution of CO2 streams. Considerations related to the health effects of the CO2 stream (e.g. toxicity), environmental impact, or other properties of impurities are outside the scope of this document.

View
Total records found: 159
arrow-prev 1 … 4 5 6 7 arrow-next

Quick filters

Organisation
CENELEC Europos elektrotechnikos standartizacijos komitetas (131) ETSI Europos telekomunikacijų standartų institutas (15) CEN Europos standartizacijos komitetas (159) ISO Tarptautinė standartizacijos organizacija (14)
Technical Committee
TK 1 Electronics (34) TK 4 Information technology (4) TK 5 Electrical engineering (42) TK 9 Furniture (2) TK 13 Agricultural engineering (4) TK 18 Telecommunications (15) TK 20 Toys, child use articles, sports and other recreational equipment (1) TK 21 Textiles and personal protective equipment (2) TK 22 Fire safety (7) TK 23 Ceramic tiles, masonry and natural stones (1) TK 24 Quality management and quality assurance (2) TK 25 Matrix, gypsum and gypsum based products (1) TK 26 Thermal insulation materials (1) TK 29 Water supply (16) TK 32 Health (10) TK 35 Safety of machinery (2) TK 36 Environmental protection (2) TK 38 Building constructions (14) TK 39 Protection (2) TK 40 Petroleuml, petroleum products, lubricants and alternative fuels (2) TK 41 Welding (8) TK 45 Electric power (6) TK 46 Roofs and building waterproof isolation (6) TK 49 Metallic materials (6) TK 50 Heating and Ventilation Systems (2) TK 51 Food analysis- Horizontal methods (1) TK 56 Metal liquid tanks and industrial pipelines (1) TK 57 Fertilizers (3) TK 59 Geotechnics (3) TK 60 Windows and doors (4) TK 68 Plastics (7) TK 70 Pulp, paper, board, adhesives (1) TK 76 Explosive atmospheres (6) TK 77 Lifts (1) TK 79 IT security techniques (3) TK 80 Road transport and traffic telematics (1) TK 81 Conservation of cultural property (1) TK 82 Safety of trackless overground vehicles (2) TK 86 Geographic information (1) TK 87 Biotechnology (8) TK 88 Building Information Modelling (BIM) (1) TK 89 Risk management and organizational governance (1) TK 91 Asset management and technical maintenance (2) TK 94 Circural economy (1) TK 99 Health Informatics (2)
ICS
Hidrologinės dirvožemio savybės (1) Acid secondary cells and batteries (3) Adhesives (1) Aerospace electric equipment and systems (3) Alarm and warning systems (1) Alcohols. Ethers (1) Aluminium products (1) Amplifiers (3) Anaesthetic, respiratory and reanimation equipment (6) Application of information technology in general (2) Binders. Sealing materials (1) Biology. Botany. Zoology (8) Boilers and heat exchangers (1) Brazing and soldering (1) Building accessories (1) Cellular materials (1) Cement. Gypsum. Lime. Mortar (2) Chemical laboratories. Laboratory equipment (4) Chemicals for purification of water (9) Cleaning appliances (7) Cleanrooms and associated controlled environments (1) Coaxial cables. Waveguides (1) Colour coding (1) Cranes (1) Dental implants (1) Diagnostic equipment (1) Domestic safety (8) Earthworks. Excavations. Foundation construction. Underground works (3) Electric road vehicles (3) Electrical and electronic equipment (2) Electrical and electronic equipment. Control systems (1) Electrical and electronic testing (1) Electrical apparatus for explosive atmospheres (4) Electrical engineering in general (1) Electrical equipment of ships and of marine structure (1) Emission (1) Environment. Health protection. Safety (Vocabularies) (1) Environmental economics. Sustainability (1) Equipment for children (1) Exploratory, drilling and extraction equipment (2) Fertilizers (2) Fibre optic interconnecting devices (1) Fibres and cables (2) Fire protection (1) Fire-fighting (4) Fire-resistance of building materials and elements (1) Floor coverings (2) Food microbiology (1) Forensic science (1) Furniture (2) Fuses and other overcurrent protection devices (2) Gas cylinders (1) Gas heaters (1) Geometrical Product Specification (GPS) (1) Governance and ethics (1) Hand-operated tools (1) Home economics in general (2) Identification cards. Chip cards. Biometrics (1) Immunity (1) Implants for surgery, prosthetics and orthotics (1) Insulators (1) Integrated circuits. Microelectronics (2) Iron and steel pipes (1) IT applications in health care technology (1) IT applications in information, documentation and publishing (1) IT applications in science (2) IT applications in transport (1) IT Security (4) Items of art and handicrafts. Cultural property and heritage (1) Laminated sheets (1) Laundry appliances (2) Leather and furs (2) Lifts. Escalators (1) Lines, connections and circuits (1) Liquid fuels (1) Luminaires (3) Maintenance services. Facilities management (2) Mechanical testing of metals (1) Mining equipment in general (1) Miscellaneous domestic and commercial equipment (1) Multilayer applications (1) Navigation and control equipment (1) Networking (1) Non-ferrous metal pipes (2) Other fluid power system components (1) Other kitchen equipment (1) Other semiconductor devices (2) Other standards related to lamps (1) Paints and varnishes (2) Petroleum products and natural gas handling equipment (1) Pipelines and its parts for district heat (1) Plastics in general (2) Playgrounds (3) Power transmission and distribution networks in general (1) Primary cells and batteries (2) Printed circuits and boards (3) Product and company certification. Conformity assessment (1) Product life-cycles (1) Properties of surfaces (1) Protection against crime (1) Protection against falling and slipping (1) Protective clothing (1) Pumps (2) Radiographic equipment (1) Refrigerating technology (1) Reinforced plastics (1) Relays (1) RF connectors (2) Rivets (1) Road equipment and installations (1) Roofs (1) Safety of machinery (1) Seismic and vibration protection (1) Small craft (2) Smart textiles (1) Stainless steels (2) Stationary containers and tanks (1) Steel structures (3) Sterilization and disinfection in general (1) Sterilizing equipment (1) Surface preparation (4) Technical aspects (6) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (15) Telecontrol. Telemetering (1) Textile fabrics (1) Thermal and sound insulating materials (6) Thermoplastic materials (1) Timber structures (1) Transformers. Reactors (2) Ventilation and air-conditioning systems (1) Ventilators. Fans. Air-conditioners (3) Walls. Partitions. Façades (3) Water heating equipment (2) Water supply systems (7) Welded joints and welds (5) Welding equipment (2) Wires (11)