Standartų projektų sąrašas

prEN 16883 Viešoji apklausa

Komentavimo iki data 2026-12-03

Kultūros paveldo išsaugojimas. Istorinių pastatų energinių charakteristikų gerinimo gairės

This document provides guidelines for sustainably improving the energy performance of historic buildings, e.g. historically, architecturally or culturally valuable buildings, while respecting their significance. The use of this document is not limited to buildings with statutory heritage designation, it applies to historic buildings of all types and ages. This document presents a normative working procedure for selecting measures to improve energy performance, based on an investigation, analysis and documentation of the building including its significance. The procedure assesses the impact of those measures in relation to preserving the character-defining elements of the building.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 15384 Viešoji apklausa

Komentavimo iki data 2026-11-20

Apsauginė ugniagesių apranga. Gamtinių teritorijų gaisrų gesinimo aprangos laboratoriniai bandymo metodai ir eksploatacinių charakteristikų reikalavimai (ISO/DIS 15384:2025)

This document specifies methods of test and minimum performance requirements for personal protective clothing, designed to protect the wearer's body, except for the head, hands, and feet, that is worn during wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This document covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels. This document is not applicable to clothing for use in situations encountered in structural firefighting (EN 469 or ISO 11999-3), rescue (ISO 18639) or where a high level of infrared radiation is expected (ISO 15538 or EN 1486), nor does this document cover clothing to protect against chemical, biological, electrical or radiation hazards. This document does not provide protection against high mechanical risks such as for protection when using chain saws.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 62087-1:2026 Archyvuotas

Komentavimo iki data 2026-10-18

Garso, vaizdo ir panaši įranga. Energijos sąnaudų nustatymas. 1 dalis. Bendrieji dalykai

Peržiūrėti metaduomenis

prEN IEC 60335-2-67:2026 Viešoji apklausa

Komentavimo iki data 2026-11-08

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-67 dalis. Ypatingieji reikalavimai, keliami komercinės paskirties grindų priežiūros mašinoms

This standard deals with the safety of powered floor treatment machines intended for commercial indoor or outdoor use for the following applications: - scrubbing, - wet or dry pick-up, - polishing and dry buffing, - application of wax, sealing products and powder based detergents, - shampooing, - stripping, grinding and scarifying of floors with an artificial surface. These machines have a cleaning motion which is more lateral or periodic than linear. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. These machines are not equipped with a traction drive. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. Battery-operated machines may be equipped with a built-in battery charger.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC/IEEE 80005-3:2026 Viešoji apklausa

Komentavimo iki data 2026-11-15

Komunalinių tinklų jungtys uoste. 3 dalis. Žemosios įtampos kranto jungčių sistemos. Bendrieji reikalavimai

This document specifies provisions for the design, installation and testing of low-voltage shore connection (LVSC) systems, onboard ships and on shore, to supply the ship with electrical power from shore. This document is applicable to: – ships requiring up to 1 MVA while at berth; – three-phase shore connection systems rated 250 A and above, and with a nominal voltage rating of 400 V AC to 1 000 V AC; – shore-side connection systems; – shore-to -ship connection and interface equipment; – transformers and reactors; – semiconductor and rotating frequency convertors; – ship-side connection systems; – protection, control, monitoring, interlocking and power management systems. This document does not apply to: – inland navigation vessels; – high-voltage shore connection systems, including ships built in accordance with the annexes of IEC/IEEE 80005-1; – the electrical power supply during docking periods, for example dry docking and other out-of-service maintenance and repair; – systems to be operated by ordinary persons as defined in 3.19. NOTE 1 Other standards are available specifically for inland navigation vessels in Europe. NOTE 2 IEC 6 0092-507 is applicable to small vessels. NOTE 3 Additional or alternative requirements can be imposed by national administrations or the authorities within whose jurisdiction the ship is intended to operate and by the owners or authorities responsible for a shore power supply or distribution system. NOTE 4 High-voltage shore connection systems are covered by IEC/IEEE 80005-1. NOTE 5 Some existing 380 V AC ship systems can be supplied by 400 V AC.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 15883-4 Viešoji apklausa

Komentavimo iki data 2026-11-26

Dezinfekavimo plautuvai. 4 dalis. Dezinfekavimo plautuvų, skirtų termolabiliesiems endoskopams chemiškai dezinfekuoti, reikalavimai ir bandymai (ISO/DIS 15883-4:2026)

This document specifies the particular requirements, including performance criteria for washer-disinfectors (WD) that are intended to be used for cleaning and chemical disinfection of thermolabile endoscopes. This document also specifies the performance requirements for the cleaning and disinfection of the washer-disinfector and its components and accessories which can be required to achieve the necessary performance criteria. The methods, instrumentation and instructions required for type testing, works testing, validation (installation, operational and performance qualification on first installation), routine control and monitoring, and requalification of WD periodically and after essential repairs, are also specified. NOTE 1 In addition, Annex A gives guidance on an appropriate division of responsibility for the range of activities covered by this document. NOTE 2 WD complying with this document can also be used for cleaning and chemical disinfection of other thermolabile re-usable medical devices for which the device manufacturer has recommended and validated this method of disinfection. WD complying with the requirements of this document are not intended for cleaning and disinfection of medical devices, including endoscopic accessories, which are heat stable and can be disinfected or sterilized by thermal methods (see ISO 15883-1:2006+Amd 1:2014, 4.1.5). The specified performance requirements of this document do not ensure the inactivation or removal of the causative agent(s) (prion protein) of transmissible spongiform encephalopathies. NOTE 3 If it is considered that prion protein might be present, particular care is needed in the choice of cleaning agents and disinfectants to ensure that the chemicals used do not react with the prion protein and/or other protein in a manner that can inhibit its removal or inactivation from the load or washer-disinfector. NOTE 4 This document can be used by prospective purchasers and manufacturers as the basis of agreement on the specification of the WD, manufacturers of endoscopes, cleaning products, and disinfecting products.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 62228-5:2026 Viešoji apklausa

Komentavimo iki data 2026-12-04

Integriniai grandynai. Siųstuvų-imtuvų EMS įvertinimas. 5 dalis. Laidinio tinklo siųstuvai-imtuvai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 12217-2 Viešoji apklausa

Komentavimo iki data 2026-10-25

Mažieji laivai. Stabilumo ir plūdrumo vertinimas ir skirstymas į kategorijas. 2 dalis. Burlaiviai (ISO/DIS 12217-2:2026)

This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed. The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load. This document is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or can be applied if they do not attain the desired design category specified in ISO 12217‑3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes: — inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in the ISO 6185 series to specific clauses of the ISO 12217 series; — gondolas and pedalos; — surfboards including sailing surfboards; and — hydrofoils and foil stabilized boats when not operating in the displacement mode. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-73:2026/prAA:2026 Archyvuotas

Komentavimo iki data 2026-10-18

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-73 dalis. Ypatingieji reikalavimai, keliami tvirtinamiesiems panardinamiesiems šildytuvams

This standard deals with the safety of electric thermal-storage room heaters intended to heat the room in which they are located, their rated voltage being not more than 250 V for single phase and 480 V for other appliances.

Peržiūrėti metaduomenis

prEN IEC 60335-2-72:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-11-08

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-72 dalis. Ypatingieji reikalavimai, keliami komercinės paskirties grindų priežiūros mašinoms su varančiąja pavara arba be jos

his Document deals with the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor use for the following applications: - sweeping, - scrubbing, - wet or dry pick-up, - polishing, - application of wax, sealing products and powder-based detergents, - shampooing of floors. These machines have a cleaning motion which is more linear than lateral or periodic. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. These machines may be equipped with a traction drive system. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. Battery-operated machines may be equipped with a built-in battery charger. This standard does not apply to - floor treatment appliances for household use (IEC 60335-2-10); - floor treatment machines for commercial use (IEC 60335-2-67); - spray extraction machines for commercial use (IEC 60335-2-68); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - road sweepers; - machines designed for use on slopes with a gradient exceeding 20 %; - machines equipped with a power take-off (PTO); - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed for use in vehicles or on board of ships or aircraft.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 1538 Viešoji apklausa

Komentavimo iki data 2026-11-05

Specialiųjų geotechnikos darbų atlikimas. Tranšėjinės sienos

This European Standard establishes general principles for the execution of diaphragm walls as either retaining walls or cut-off walls. NOTE 1 This standard covers only structures constructed in a trench excavated with a support fluid or in dry conditions, where soil is removed and replaced by concrete or slurry and with wall thickness B ≥ 40 cm. NOTE 2 Diaphragm walls can be permanent or temporary structures. NOTE 3 The following types of structure are considered: a) retaining walls: usually constructed to support the sides of an excavation in the ground. They include: 1) cast in situ concrete diaphragm walls; 2) precast concrete diaphragm walls; 3) reinforced slurry walls; b) cut-off walls: usually constructed to prevent migration of groundwater, clear or polluted, or of other contaminants present in the ground. They include: 1) slurry walls (possibly with membranes or sheet piles); 2) plastic concrete walls. NOTE 4 Walls formed shallow vertical trenches (typically excavations with a ratio of depth over thickness D/B < 5 or D < 5 m) are not covered by this standard.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 13356 Viešoji apklausa

Komentavimo iki data 2026-10-31

Chirurginiai implantai. Aliuminio oksido keraminės medžiagos. Cirkonio dioksidas. Itrio oksidu stabilizuotas tetragoninis cirkonio dioksidas (Y-TZP) (ISO/DIS 13356:2026)

This document specifies the requirements and corresponding test methods for a biocompatible and bio-inert ceramic bone-substitute material based on yttriastabilized tetragonal zirconia (yttria tetragonal zirconia polycrystal, Y-TZP) for use as a material for surgical implants.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-85:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-12-06

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-85 dalis. Ypatingieji reikalavimai, keliami audinių apdorojimo garu aparatams

The European standard deals with the safety of electric fabric steamers intended for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 61010-2-032:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Saugos reikalavimai, keliami elektrinei matavimo, valdymo ir laboratorinei įrangai. 2-032 dalis. Ypatingieji reikalavimai, keliami elektriniams bandymams ir matavimams naudojamiems rankiniams ir ranka valdomiems srovės jutikliams

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

FprEN IEC 60086-1:2025/prAA:2026 Archyvuotas

Komentavimo iki data 2026-10-18

Pirminės baterijos. 1 dalis. Bendrieji dalykai

Peržiūrėti metaduomenis

prEN ISO 23279 Viešoji apklausa

Komentavimo iki data 2026-11-12

Neardomieji suvirinimo siūlių bandymai. Ultragarsiniai bandymai. Suvirinimo siūlių netolygumo apibūdinimas (ISO/DIS 23279:2026)

ISO 23279:2017 specifies how to characterize indications from discontinuities by classifying them as originating from planar or non-planar embedded discontinuities. This procedure is also suitable for indications from discontinuities that break the surface after removal of the weld reinforcement.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 1995-1-2:2025/prA1 Viešoji apklausa

Komentavimo iki data 2026-11-12

Eurokodas 5. Medinių konstrukcijų projektavimas. 1-2 dalis. Konstrukcijų elgsenos ugnyje skaičiavimas

1.1 Scope of EN 1995-1-2 (1) This document deals with the design of timber structures for the accidental situation of fire exposure and it is intended to be used in conjunction with EN 1995-1-1 and EN 1991-1-2. This document only identifies differences from, or supplements to, normal temperature design. (2) This document applies to timber structures required to fulfil a loadbearing function, separating function or both. (3) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance. (4) This document applies to structures, or parts of structures, that are within the scope of EN 1995-1-1 and are designed accordingly. (5) The methods given in this document are applicable to all products covered by European technical product specifications made reference to in this document. 1.2 Assumptions (1) In addition to the general assumptions of EN 1990, the following assumptions apply: - the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation; - any fire protection measure taken into account in the design will be adequately maintained.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 1127-2 Viešoji apklausa

Komentavimo iki data 2026-11-26

Sprogiosios atmosferos. Sprogimo prevencija ir apsauga nuo jo. 2 dalis. Pagrindinės kasybos sąvokos ir metodika

This document specifies methods for explosion prevention and protection in mining by outlining the basic concepts and methodology for the design and construction of equipment, protective systems and components. This document applies to Group I equipment, protective systems and components intended for use in underground parts of mines and those parts of their surface installations at risk from firedamp and/or combustible dust. NOTE Detailed information on specific equipment, protective systems and components is contained in the relevant individual standards. Safety-relevant data regarding flammable materials and explosive atmospheres are required for the design and construction of the explosion protection measures. This document specifies methods for the identification and assessment of hazardous situations that may lead to explosions and describes the design and construction measures appropriate for the required safety. This is achieved by: — risk assessment; — risk reduction. The safety of equipment, protective systems, and components can be achieved by eliminating hazards and/or limiting the risk, i.e.: a) by appropriate design (without using safeguarding); b) by safeguarding; c) by information for use; d) by any other preventive measures. Measures in accordance with a) (prevention) and b) (protection) against explosions are dealt with in Clause 6 of this document; measures according to c) against explosions are dealt with in Clause 7 of this document. Measures in accordance with d) are not described in this document. They are dealt with in EN ISO 12100:2010, Clause 6. The preventive and protective measures described in this document will not provide the required level of protection unless the equipment, protective systems and components are operated in line with their intended use and are installed and maintained according to the relevant codes of practice or requirements. This document is applicable to any equipment, protective systems and components intended to be used in potentially explosive atmospheres. These atmospheres can arise from flammable materials processed, used or released by the equipment, protective systems and components or from materials in the vicinity of the equipment, protective systems and components and/or from the materials of construction of the equipment, protective systems and components. As shot firing can release potentially explosive atmospheres, this document is also applicable to the equipment used for shot firing, apart from the explosives and detonators. This document is applicable to equipment, protective systems and components at all stages of use. This document is not applicable to: — medical devices intended for use in a medical environment; — equipment, protective systems and components where the explosion hazard results exclusively from the presence of explosives or unstable chemical substances; — equipment, protective systems and components where the explosion can result from reaction of substances with oxidising agents other than atmospheric oxygen or by other hazardous reactions or conditions other than atmospheric conditions; — equipment intended for use in domestic and non-commercial environments where explosive atmospheres may only rarely be created and solely as a result of the accidental leakage of fuel gas; — personal protective equipment covered by Regulation (EU) 2016/425; the design and construction of systems containing desired, controlled combustion processes, unless they can act as ignition sources in potentially explosive atmospheres; — mines where firedamp and/or combustible dust are not naturally present and surface installations such as coal preparation plants, power plants, coke oven plants etc. in which an explosive atmosphere can be present, but which are not part of a coal mine. These are covered by EN 1127-1:2019.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 18052:2025/prA1 Viešoji apklausa

Komentavimo iki data 2026-12-06

Intelektinės transporto sistemos. El. sauga. Pagalbos iškvietos sistemos (eCall) visos grandinės atitikties testavimas, taikomas eCall aukšto lygmens taikomųjų programų protokolams (HLAP), naudojamiems mišrioje perjungiamųjų linijų tinklų ir paketinio ryšio tinklų aplinkoje

This document describes the key actors in the eCall chain of service provision in hybrid circuit switched/packet switched network environments as: 1) In-Vehicle System (IVS)/vehicle, 2) Mobile Network Operator (MNO), 3) Public Safety Answering Point (PSAP), and to provide conformance tests for actor groups 1) – 3). NOTE 1 Conformance tests are not appropriate nor required for vehicle occupants, although they are the recipient of the service. NOTE 2 Third party eCall systems (TPS-eCall) are not within the scope of this deliverable. This is because the core TPS-eCall standard (EN 16102) does not specify the communications link between the vehicle and the TPS service provider. NOTE 3 These conformance tests are partly based on the appropriate conformance tests from EN 16454 and CEN/prEN 17240. This deliverable therefore adapts and revises Conformance Test Protocols (CTP) from EN 16454 and CEN/prEN 17240 for hybrid circuit switched/packet switched network environments. This document complements EN 16454 and CEN/prEN 17240 and provides a suite of conformance tests for IVS equipment, MNOs and PSAPs, required to ensure and demonstrate compliance with CEN/prEN 17905. The scope covers conformance testing of new engineering developments, products and systems, and does not imply testing associated with individual installations in vehicles or locations.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 1143-1 Archyvuotas

Komentavimo iki data 2026-10-18

Patikimo saugojimo įrenginiai. Reikalavimai, klasifikacija ir atsparumo įsilaužimui bandymo metodai. 1 dalis. Seifai, bankomatų seifai, saugyklų durys ir saugyklos

This document establishes the basis for testing and classifying free-standing safes, safe plinths, built-in safes (floor and wall), ATM safes and ATM bases, strongroom doors and strongrooms (with or without a door) according to their burglary resistance. This document does not cover testing and classifying Deposit Systems and ATM systems.

Peržiūrėti metaduomenis

ISO/DIS 24651 Viešoji apklausa

Komentavimo iki data 2026-10-23

Biotechnologija. Biobankai. Iš kaulų čiulpų gautoms žmogaus mezenchiminėms stromos ląstelėms keliami reikalavimai

This document specifies requirements for the biobanking of human mesenchymal stromal cells derived from bone marrow (hBM-MSCs), including the collection of bone marrow and associated data, isolation, culture, characterization, quality control, cryopreservation, storage, thawing, disposal, distribution and transport. This document is applicable to all organizations performing biobanking with hBM-MSCs used for research. This document does not apply to hBM-MSCs for the purpose of in vivo application in humans, cell therapy, clinical applications, tissue engineering or therapeutic use. NOTE International, national or regional regulations or requirements, or multiple of them, can also apply to specific topics covered in this document.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 16423 Viešoji apklausa

Komentavimo iki data 2026-11-12

Suskystintosios naftos dujos. Ištirpusių likučių nustatymas. Dujų chromatografijos metodas, naudojant skysčio injekavimą į kolonėlę

This European Standard specifies a method for the determination of the dissolved residual matter, also known as evaporation residue, in liquefied petroleum gases (LPG), by gas chromatography in the range of (10 to 600) mg/kg (ppm mass). This test method quantifies soluble organic compounds (hydrocarbon materials), sometimes called ‘evaporation residue’, which can be present in liquefied petroleum gases and which are substantially less volatile than the LPG product, i.e. with a boiling point between 174 °C and 522 °C (C10 to C40). Higher boiling materials, or materials that adhere permanently to the chromatographic column, will not be detected. WARNING - This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 1995-2:2026/prA1 Viešoji apklausa

Komentavimo iki data 2026-11-12

Eurokodas 5. Medinių konstrukcijų projektavimas. 2 dalis. Tiltai

(1) This document gives design rules for the structural parts of bridges made of timber or other wood-based materials, either singly or compositely with concrete, steel or other materials. (2) The provisions of this document supplement, and in some cases modify or supersede, provisions given EN 1995-1-1. (3) Prestressed timber-concrete composite (TCC) members are not covered by this document. The design of stress-laminated timber decks used as part of a TCC system is covered. (4) TCC structures which rely on friction between wood and concrete are not covered by this document.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12915-2 Viešoji apklausa

Komentavimo iki data 2026-12-06

Produktai žmonėms vartoti skirtam vandeniui ruošti. Aktyvintųjų anglių grūdeliai. 2 dalis. Pakartotinai aktyvintų anglių grūdeliai

This document is applicable to reactivated granular activated carbon used for treatment of water intended for human consumption. This document describes the characteristics of reactivated granular activated carbon and specifies the requirements and the corresponding test methods for reactivated granular activated carbon. This document gives information on the use of reactivated granular activated carbon in water treatment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12814-3 Viešoji apklausa

Komentavimo iki data 2026-12-06

Termoplastikinių pusgaminių suvirintųjų jungčių bandymai. 3 dalis. Tempiamojo valkšnumo bandymas

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile creep test perpendicular to the weld in order to determine the long-term tensile welding factor. A tensile creep test may be used in conjunction with other tests (e.g. bend test, tensile test, macrographic examination, …) to assess the performance of welded assemblies made from thermoplastics materials. The test is applicable to welded assemblies made from thermoplastics materials, filled or unfilled such as tubes and fittings, sheets, plates and profiles, but not reinforced, irrespective of the welding process used.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS