Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN ISO 16119-3 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvų reikalavimai. 3 dalis. Krūmų ir medžių purkštuvai (ISO/DIS 16119-3:2026)

This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254 6). • Scope out liquid fertilizer application • Adding Part 5 - Aerial sprayers • Instruction handbook content • Annex A, table with techniques needs to be updated. • Additional standards for application equipment listed in Annex A and covered by mandate M435 and M471 of the EC shall be developed.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-4 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvams keliami reikalavimai. 4 dalis. Stacionarieji ir pusiau stacionarūs purkštuvai (ISO/DIS 16119-4:2026)

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of fixed and semi-mobile sprayers, as defined in 3.1 and 3.2, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. This type of spraying system is generally a combination of separate elements (main tank, pump and application unit) that can be assembled in fixed installations (fixed sprayers) or with moving parts (semi-mobile sprayers). It does not apply to application equipment for space/spatial treatments. It is intended to be used with ISO 16119 1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those stated in ISO 16119 1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119 1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254 6). • Filling - Total tank extra volume • Quick coupler for CTS + mandatory provision of inductor hopper or CTS • Filters drain valve • Digital level indicator + accuracy • Pump requirements as per ISO 12908: 2020 • Residue concentration only one method for system rinsing

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-2 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvų reikalavimai. 2 dalis. Purkštuvai su horizontaliuoju skirstomuoju vamzdžiu (ISO/DIS 16119-2:2026)

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is intended to be used with ISO 16119 1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119 1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119 1 for machines within the scope of this part of ISO 16119. It does not cover safety aspects (see ISO 4254 6). • Define and specify requirements for ‘Modules’ • Filling -Total tank extra volume • Quick coupler for CTS + mandatory provision of inductor hopper or CTS • Filters drain valve • Digital level indicator + accuracy • Boom automatic section control (>24 m) + ISOBUS task controller • Boom nozzle spacing equal location • Pump requirements as per ISO 12908: 2020 • Residue concentration only one method for system rinsing • Direct injection definition, requirements, test method

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-1 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvų reikalavimai. 1 dalis. Bendrieji dalykai (ISO/DIS 16119-1:2026)

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS