Standartų projektų sąrašas

Paieškos frazė

Išplėstinė paieška

Žymuo

Direktyvos

Organizacija

ICS

Technikos komitetas

Užsienio komitetas

Darbo grupė

Etapas

Būsena

Komentavimo data

iki

Rezultatai

prEN 13497 Viešoji apklausa

Komentavimo iki data 2026-12-05

Statybiniai termoizoliaciniai gaminiai. Išorinių sudėtinių termoizoliacinių sistemų atsparumo smūgiui nustatymas

This document specifies the equipment and procedure for determining the resistance to impact of ETICS kits with renders.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 14509-5 Viešoji apklausa

Komentavimo iki data 2026-11-08

Gamyklinės iš abiejų pusių metalu aptaisytos sluoksninės izoliacinės plokštės. 5 dalis. Projektavimo metodai

This document specifies design methods for combination of actions and spans for factory made double skin metal faced insulating sandwich panels (hereafter sandwich panels). The sandwich panels are for use in self-supporting and structural applications in roofs, in external and internal walls (including partitions) and in ceilings in buildings as well as those in cold store applications. This document covers uniformly distributed loads, line loads perpendicular to the span over the full width of the panel and thermal gradients, it gives no information about normal forced axially loaded sandwich panels, torsional loaded sandwich panels or sandwich panels as a part of a diaphragm.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 14509-2 Viešoji apklausa

Komentavimo iki data 2026-11-08

Gamyklinės iš abiejų pusių metalu aptaisytos izoliacinės plokštės, naudojamos konstrukcijoms

This document covers structural double skin metal faced insulating sandwich panels intended to be used as elements for structural applications in construction works in roofs, in external and internal walls (including partitions) and in ceilings (hereafter referred to as structural sandwich panels). The structural sandwich panels consist of two faces made of: — steel; — stainless steel; — aluminium; — aluminium alloys; — copper and insulating core made of — rigid polyurethane foam (PU) (see 3.1.23); — expanded polystyrene (EPS) (see 3.1.21); — extruded polystyrene foam (XPS) (see 3.1.22); — phenolic foam (PF) (see 3.1.20); — mineral wool (MW) (see 3.1.19) either by using an auto-adhesive bonding technique or by using a separate adhesive layer. Products which are — curved; — perforated (perforated face); — used for stabilization purposes having insulation core material of phenolic foam; — consisting of two or more clearly specified layers of different insulating core materials (multi-layered) or of different materials per face; — used as ceilings when fastening is under permanent tension load; — parts of clean room kits, conditioning room kits, cold storage room kits and cold storage building envelope and building kits; — reused are excluded from this product definition.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 14509-3 Viešoji apklausa

Komentavimo iki data 2026-11-08

Gamyklinės iš abiejų pusių metalu aptaisytos sluoksninės izoliacinės plokštės. 3 dalis. Bandymo metodai mechaniniam atsparumui, konstrukcijos elgsenai ir patvarumui nustatyti

This document specifies test methods needed for determination of mechanical strength, building physical behaviour and durability of factory-made double skin metal faced insulating sandwich panels (hereafter sandwich panels) for both self-supporting and structural applications in roofs, in external and internal walls (including partitions) and in ceilings in buildings as well as those in cold store applications.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 14509-4 Viešoji apklausa

Komentavimo iki data 2026-11-08

Gamyklinės iš abiejų pusių metalu aptaisytos sluoksninės izoliacinės plokštės. 4 dalis. Bandymo metodai plokščių tvirtinimui prie pagrindo konstrukcijos vertinti ir jos įtvirtinimo poveikiui nustatyti

This document specifies test methods for determination of characteristics for fixing of factory-made double skin metal faced insulating sandwich panels (hereafter referred to as sandwich panels) to substructure and for stabilization of substructure. Sandwich panels are used for both self-supporting and structural applications in roofs, in external and internal walls (including partitions) and in ceilings in buildings as well as those in cold store applications.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 14509-1 Viešoji apklausa

Komentavimo iki data 2026-10-31

Gamyklinės iš abiejų pusių metalu aptaisytos izoliacinės plokštės, naudojamos nuo pagrindo atskiriamoms konstrukcijoms

This document specifies characteristics of factory-made double skin metal faced insulating sandwich panels intended to be used as elements for self-supporting applications in construction works in roofs, external and internal walls (including partitions) and in ceilings (hereafter referred to as non-structural sandwich panels). The non-structural sandwich panels consist of two faces made of: — steel; — stainless steel; — aluminium; — aluminium alloys; — copper and insulating core made of: — rigid polyurethane (PU) (see 3.1.17); — expanded polystyrene (EPS) (see 3.1.15); — extruded polystyrene foam (XPS) (see 3.1.16); — phenolic foam (PF) (see 3.1.14); — mineral wool (MW) (see 3.1.13) either by using an auto-adhesive bonding technique or by using a separate adhesive layer. Products which are — curved; — perforated (perforated faces); — used for stabilization purposes; — consisting of two or more clearly specified layers of different insulating core materials (multi-layered) or of different materials per face; — used as ceilings when fastening is under permanent tension load; — parts of clean room kits, conditioning room kits, cold storage room kits and cold storage building envelope and building kits; — reused; are excluded from this product definition. Products intended to be used for structural applications are excluded from this product definition.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS