GDPR

projektai-lsd Lithuanian Standards Board
Portal for draft standards

Extended search

till

Results

Showing:
Total records found: 319
arrow-prev 1 … 5 6 7 8 9 … 13 arrow-next
EN 12152:2023/prA1 Public enquiry
Comment end date 2026-11-07
Curtain walling - Air permeability - Performance requirements and classification

This document specifies requirements and classification of air permeability of both fixed and openable parts of curtain walling, under positive and negative static air pressure. This document applies to curtain walling as specified in EN 13830. NOTE This version of EN 12152:2023 will supersede EN 12152:2002. Existing test results according to EN 12152:2002 could be considered still valid compared with this version of EN 12152.

prEN IEC 63202-7:2026 Public enquiry
Comment end date 2026-11-15
Photovoltaic cells - Part 7: Measurement of bending strength of crystalline silicon photovoltaic cells
prEN IEC 63758-5-1:2026 Public enquiry
Comment end date 2026-11-22
Qi specification - Version 2.3 - Part 5-1: MPP communications protocol (Fast Track)
prEN IEC/ASTM 62885-10:2026 Public enquiry
Comment end date 2026-12-06
Battery-related items for surface cleaning appliances for household or similar use - Methods for measuring the performance
prEN ISO 8502-15 Public enquiry
Comment end date 2026-11-05
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO/DIS 8502‑15:2026)

This document specifies a method of extracting, for analysis, acid soluble contaminants from a surface by use of flexible cells in the form of adhesive patches or sleeves which can be attached to any surface, regardless of its shape (flat or curved) and its orientation (facing in any direction, including downwards). The described method is suitable for use in the field to determine the presence of acid soluble contaminants before painting or a similar treatment. This document does not cover the subsequent analysis of the contaminants that have been dissolved off. Methods of analysis suitable for field use are described in other parts of ISO 8502 such as ISO 8502-5. This document is similar in procedure to, but not equal to, ISO 8502-6. The main difference is the solvent used and the subsequent analysis that can be performed on the extraction solution.

prEN ISO 22118 Public enquiry
Comment end date 2026-11-07
Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection and quantification of microorganisms - Performance characteristics (ISO/DIS 22118:2026)

ISO 22118:2010 specifies minimum requirements of performance characteristics for the detection of nucleic acid sequences (DNA or RNA) by molecular methods. ISO 22118:2010 applies to the detection of food-borne pathogens in foodstuffs and isolates obtained from them using molecular detection methods based on the polymerase chain reaction (PCR). ISO 22118:2010 is also applicable, for example, to the detection of food-borne pathogens in environmental samples and in animal feeding stuffs.

prEN 13126-5 Public enquiry
Comment end date 2026-11-14
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows and door height windows

This document specifies requirements and test methods for durability, strength, security and function of devices that restrict the opening of windows and door height windows to a maximum opening width. Depending on the requirements imposed in Member States on the basis of building regulations or in tenders for window or door height windows, the hardware manufacturer designs the restrictors to allow opening widths of for example max. 89 mm, max. 100 mm or max. 120 mm; for the use of restrictors in building components. This document does not apply to a) restrictors with an opening width limitation of more than 120 mm; b) child protective window restrictors intended to be installed by the end consumers; such restrictors from the DIY market are covered in EN 16281; c) restrictors for window designs with sliding sashes. NOTE 1 Restrictors and reverse restrictors can be either a separate item of hardware or an integral part of hardware, for example a part of the operating gear or an integral part of a hinge. NOTE 2 It is possible to use more than one restrictor on a single window. NOTE 3 The requirements included within this document take the needs for child safety into consideration. This document applies to restrictors that are intended to be factory installed in windows and door height windows by specialist companies in their production facilities.

prEN 16409 Public enquiry
Comment end date 2026-12-13
Chemicals used for treatment of water intended for human consumption - Dolomitic lime

This European Standard is applicable to Dolomitic lime used for treatment of water intended for human consumption. It describes the characteristics of magnesium oxide and specifies the requirements and the corresponding test methods for Dolomitic lime. It gives information on its use in water treatment.

prEN ISO 13606-5 Public enquiry
Comment end date 2026-12-12
Health informatics - Electronic health record communication - Part 5: Interface specification (ISO/DIS 13606-5:2026)

This document specifies the information architecture required for interoperable communications between systems and services that need or provide EHR data. This document is not intended to specify the internal architecture or database design of such systems. The subject of the record or record extract to be communicated is an individual person, and the scope of the communication is predominantly with respect to that person's care. Uses of healthcare records for other purposes such as administration, management, research and epidemiology, which require aggregations of individual people's records, are not the focus of this document but such secondary uses could also find the document useful. This document defines a set of interfaces to request and provide: — an EHR_EXTRACT for a given subject of care as defined in ISO 13606-1; — one or more ARCHETYPE(s) as defined in ISO 13606-2; — an EHR_AUDIT_LOG_EXTRACT for a given subject of care as defined in ISO 13606-4. This document defines the set of interactions to request each of these artefacts, and to provide the data to the requesting party or to decline the request. An interface to query an EHR or populations of EHRs, for example for clinical audit or research, are beyond its scope, although provision is made for certain selection criteria to be specified when requesting an EHR_EXTRACT which might also serve for population queries. This document defines the Computational Viewpoint for each interface, without specifying or restricting particular engineering approaches to implementing these as messages or as service interfaces. This document effectively defines the payload to be communicated at each interface. It does not specify the particular information that different transport protocols will additionally require, nor the security or authentication procedures that might be agreed between the communicating parties or required by different jurisdictions.

EN 60079-5:2015/prA2:2026 Archived
Comment end date 2026-10-16
Amendment 2 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
prEN IEC 60335-2-69:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use

This standard deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. These machines may be provided with a blowing or inflating function. The inner diameter of the dust container connector to the suction hose shall not exceed 200 mm. It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system. Attention is drawn to the fact that additional requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: – public use areas such as hotels, schools, hospitals; – industrial locations, for example factories and manufacturing shops; – retail outlets, for example shops and supermarkets; – business premises, for example offices and banks; – all uses other than normal housekeeping purposes. These machines are not equipped with a traction drive. The following power systems are covered: – mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, – battery-operated motors. This standard also applies to machines handling hazardous dust, such as asbestos, and combustible dust in other than an explosive dust atmosphere. Additional requirements for machines handling hazardous dust are given in normative Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply. Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard. This standard does not apply to – vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); – floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); – spray extraction machines for commercial use (IEC 60335-2-68); IEC 60335-2-67 and IEC 60335-2-68 cover only machines without traction drive. – hand-held mains-operated electrical garden blowers, vacuums and blower vacuums (IEC 60335-2-100); – hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); – appliances for medical purposes (IEC 60601-1); – machines designed for use in corrosive environments; – machines designed for picking up liquids with a flash point below 55 °C; – machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22; – machines intended to vacuum ash from fireplaces, chimneys, ovens, ashtrays and similar places of ash accumulation.

prEN IEC 60335-2-124:2026 Public enquiry
Comment end date 2026-11-15
Household and similar electrical appliances - Safety - Part 2-124: Particular requirements for commercial dry ice blasting machines

This standard deals with the safety of dry ice blasting machines intended for commercial indoor or outdoor use for the hand-guided cleaning, decoating and stripping of surfaces. The blasting machines are either equipped with containers for storage of dry ice or produce dry ice internally. These machines are not equipped with a traction drive. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard does not apply to - dry ice blasting machines with integrated generation of compressed air; - dry ice blasting machines using other transport gases besides compressed air or nitrogen; - dry ice blasting machines with nozzles being controlled by robotic arms; - spray extraction machines for commercial use (IEC 60335-2-68); - high pressure cleaners (IEC 60335-2-79); - sand blasting equipment (abrasive blasting); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for use in vehicles in non-ventilated environment; - machines designed for use on board of ships or aircraft.

prEN IEC 63758-1-3:2026 Public enquiry
Comment end date 2026-11-22
Qi specification - Version 2.3 - Part 1-3: General - Technical system overview (Fast Track)
prEN ISO 14644-7 Public enquiry
Comment end date 2026-12-03
Cleanrooms and associated controlled environments - Part 7: Separative devices (ISO/DIS 14644-7:2026)

ISO 14644-7:2004 specifies the minimum requirements for the design, construction, installation, test and approval of separative devices, in those respects where they differ from cleanrooms as described in ISO 14644-4 and 14644-5. The application of ISO 14644-7:2004 takes into account the following limitations: user requirements are as agreed by customer and supplier; application-specific requirements are not addressed; specific processes to be accommodated in the separative-device installation are not specified; fire, safety and other regulatory matters are not considered specifically; where appropriate, national and local regulations apply. ISO 14644-7:2004 is not applicable to full-suits.

prEN ISO 9094 Public enquiry
Comment end date 2026-11-26
Small craft - Fire protection (ISO/DIS 9094:2026)

This document defines a practical degree of fire prevention and protection intended to provide enough time for occupants to escape a fire on board small craft. It applies to small craft having a length of the hull (LH) of up to 24 m except for personal watercraft. This document does not cover: —    the design and installation of permanently installed galley stoves and heating appliances (including components used to distribute the heat) using fuels that are liquid at atmospheric pressure on small craft, which are covered by ISO 14895:2016; —    carbon monoxide detecting systems, which are covered by ISO 12133.

prEN IEC 62087-2:2026 Archived
Comment end date 2026-10-18
Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media
prEN IEC 60335-2-67:2026/prAA:2026 Public enquiry
Comment end date 2026-11-08
Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use

This standard deals with the safety of powered floor treatment machines intended for commercial indoor or outdoor use for the following applications: - scrubbing, - wet or dry pick-up, - polishing and dry buffing, - application of wax, sealing products and powder based detergents, - shampooing, - stripping, grinding and scarifying of floors with an artificial surface. These machines have a cleaning motion which is more lateral or periodic than linear. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. These machines are not equipped with a traction drive. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. Battery-operated machines may be equipped with a built-in battery charger.

prEN ISO 10874 Public enquiry
Comment end date 2026-11-14
Resilient, textile, laminate and modular mechanical locked floor coverings - Classification (ISO/DIS 10874:2026)

ISO 10874:2009 establishes a classification system for resilient, textile, laminate and and modular mechanical locked floor coverings floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the relevant International Standard for each type of floor covering. ISO 10874:2009 is also intended to provide guidance for manufacturers, specifiers and consumers, to enable them to choose the appropriate class of floor covering for any given area of use or specific room.

prEN ISO 5359 Public enquiry
Comment end date 2026-11-26
Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO/DIS 5359:2026)

ISO 5359:2014 specifies requirements for low-pressure hose assemblies intended for use with the following medical gases: oxygen, nitrous oxide, medical air, helium, carbon dioxide, xenon, specified mixtures of the gases listed above, oxygen-enriched air, air for driving surgical tools, nitrogen for driving surgical tools, and for use with vacuum. It applies to hose assemblies operating at pressures up to 1 400 kPa and for vacuum systems at pressures not greater than 60 kPa absolute. It does not specify the dimensions and allocation of the gas-specific inlet and outlet connectors for the hose assemblies.It does not specify requirements for coaxial hoses used for the supply and removal of air for driving surgical tools.Nor does it specify the intended uses of hose assemblies.

prEN 3682-002 Public enquiry
Comment end date 2026-12-05
Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 002: Specification of performance and contact arrangements
prEN IEC 61010-2-034:2026 Public enquiry
Comment end date 2026-11-22
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength
prEN 2665-004 Public enquiry
Comment end date 2026-10-24
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 004: UNC thread terminals - Product standard

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 20 A to 50 A, used in aircraft on-board circuits at a temperature between −55 °C and 90 °C at an altitude of 15 000 m max. These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping They will continue to function up to the short-circuit current.

prEN ISO 20482 Public enquiry
Comment end date 2026-11-01
Metallic materials - Sheet and strip - Erichsen cupping test (ISO/DIS 20482:2026)

ISO 20482:2013 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming. For materials that are thicker and when only narrower strips are available, tools of specified dimensions are provided, in which case subscripts are used, as shown in Table 1.

prEN IEC 61189-5-501:2026 Public enquiry
Comment end date 2026-11-20
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-501: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of solder fluxes
prEN IEC 60076-1:2026 Public enquiry
Comment end date 2026-11-29
Power transformers - Part 1: General
Total records found: 319
arrow-prev 1 … 5 6 7 8 9 … 13 arrow-next

Quick filters

Technical Committee
TK 1 Electronics (34) TK 4 Information technology (4) TK 5 Electrical engineering (42) TK 9 Furniture (2) TK 13 Agricultural engineering (4) TK 18 Telecommunications (15) TK 20 Toys, child use articles, sports and other recreational equipment (1) TK 21 Textiles and personal protective equipment (2) TK 22 Fire safety (7) TK 23 Ceramic tiles, masonry and natural stones (1) TK 24 Quality management and quality assurance (2) TK 25 Matrix, gypsum and gypsum based products (1) TK 26 Thermal insulation materials (1) TK 29 Water supply (16) TK 32 Health (10) TK 35 Safety of machinery (2) TK 36 Environmental protection (2) TK 38 Building constructions (14) TK 39 Protection (2) TK 40 Petroleuml, petroleum products, lubricants and alternative fuels (2) TK 41 Welding (8) TK 45 Electric power (6) TK 46 Roofs and building waterproof isolation (6) TK 49 Metallic materials (6) TK 50 Heating and Ventilation Systems (2) TK 51 Food analysis- Horizontal methods (1) TK 56 Metal liquid tanks and industrial pipelines (1) TK 57 Fertilizers (3) TK 59 Geotechnics (3) TK 60 Windows and doors (4) TK 68 Plastics (7) TK 70 Pulp, paper, board, adhesives (1) TK 76 Explosive atmospheres (6) TK 77 Lifts (1) TK 79 IT security techniques (3) TK 80 Road transport and traffic telematics (1) TK 81 Conservation of cultural property (1) TK 82 Safety of trackless overground vehicles (2) TK 86 Geographic information (1) TK 87 Biotechnology (8) TK 88 Building Information Modelling (BIM) (1) TK 89 Risk management and organizational governance (1) TK 91 Asset management and technical maintenance (2) TK 94 Circural economy (1) TK 99 Health Informatics (2)
ICS
Hidrologinės dirvožemio savybės (1) Acid secondary cells and batteries (3) Adhesives (1) Aerospace electric equipment and systems (3) Alarm and warning systems (1) Alcohols. Ethers (1) Aluminium products (1) Amplifiers (3) Anaesthetic, respiratory and reanimation equipment (6) Application of information technology in general (2) Binders. Sealing materials (1) Biology. Botany. Zoology (8) Boilers and heat exchangers (1) Brazing and soldering (1) Building accessories (1) Cellular materials (1) Cement. Gypsum. Lime. Mortar (2) Chemical laboratories. Laboratory equipment (4) Chemicals for purification of water (9) Cleaning appliances (7) Cleanrooms and associated controlled environments (1) Coaxial cables. Waveguides (1) Colour coding (1) Cranes (1) Dental implants (1) Diagnostic equipment (1) Domestic safety (8) Earthworks. Excavations. Foundation construction. Underground works (3) Electric road vehicles (3) Electrical and electronic equipment (2) Electrical and electronic equipment. Control systems (1) Electrical and electronic testing (1) Electrical apparatus for explosive atmospheres (4) Electrical engineering in general (1) Electrical equipment of ships and of marine structure (1) Emission (1) Environment. Health protection. Safety (Vocabularies) (1) Environmental economics. Sustainability (1) Equipment for children (1) Exploratory, drilling and extraction equipment (2) Fertilizers (2) Fibre optic interconnecting devices (1) Fibres and cables (2) Fire protection (1) Fire-fighting (4) Fire-resistance of building materials and elements (1) Floor coverings (2) Food microbiology (1) Forensic science (1) Furniture (2) Fuses and other overcurrent protection devices (2) Gas cylinders (1) Gas heaters (1) Geometrical Product Specification (GPS) (1) Governance and ethics (1) Hand-operated tools (1) Home economics in general (2) Identification cards. Chip cards. Biometrics (1) Immunity (1) Implants for surgery, prosthetics and orthotics (1) Insulators (1) Integrated circuits. Microelectronics (2) Iron and steel pipes (1) IT applications in health care technology (1) IT applications in information, documentation and publishing (1) IT applications in science (2) IT applications in transport (1) IT Security (4) Items of art and handicrafts. Cultural property and heritage (1) Laminated sheets (1) Laundry appliances (2) Leather and furs (2) Lifts. Escalators (1) Lines, connections and circuits (1) Liquid fuels (1) Luminaires (3) Maintenance services. Facilities management (2) Mechanical testing of metals (1) Mining equipment in general (1) Miscellaneous domestic and commercial equipment (1) Multilayer applications (1) Navigation and control equipment (1) Networking (1) Non-ferrous metal pipes (2) Other fluid power system components (1) Other kitchen equipment (1) Other semiconductor devices (2) Other standards related to lamps (1) Paints and varnishes (2) Petroleum products and natural gas handling equipment (1) Pipelines and its parts for district heat (1) Plastics in general (2) Playgrounds (3) Power transmission and distribution networks in general (1) Primary cells and batteries (2) Printed circuits and boards (3) Product and company certification. Conformity assessment (1) Product life-cycles (1) Properties of surfaces (1) Protection against crime (1) Protection against falling and slipping (1) Protective clothing (1) Pumps (2) Radiographic equipment (1) Refrigerating technology (1) Reinforced plastics (1) Relays (1) RF connectors (2) Rivets (1) Road equipment and installations (1) Roofs (1) Safety of machinery (1) Seismic and vibration protection (1) Small craft (2) Smart textiles (1) Stainless steels (2) Stationary containers and tanks (1) Steel structures (3) Sterilization and disinfection in general (1) Sterilizing equipment (1) Surface preparation (4) Technical aspects (6) TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING (15) Telecontrol. Telemetering (1) Textile fabrics (1) Thermal and sound insulating materials (6) Thermoplastic materials (1) Timber structures (1) Transformers. Reactors (2) Ventilation and air-conditioning systems (1) Ventilators. Fans. Air-conditioners (3) Walls. Partitions. Façades (3) Water heating equipment (2) Water supply systems (7) Welded joints and welds (5) Welding equipment (2) Wires (11)