Standartų projektų sąrašas

prEN IEC 61010-2-034:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Saugos reikalavimai, keliami elektrinei matavimo, valdymo ir laboratorinei įrangai. 2-034 dalis. Ypatingieji reikalavimai, keliami izoliacijos varžos matavimo įrangai ir elektrinio atsparumo bandymo įrangai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 2665-004 Viešoji apklausa

Komentavimo iki data 2026-10-24

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 004: UNC thread terminals - Product standard

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 20 A to 50 A, used in aircraft on-board circuits at a temperature between −55 °C and 90 °C at an altitude of 15 000 m max. These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping They will continue to function up to the short-circuit current.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 20482 Viešoji apklausa

Komentavimo iki data 2026-11-01

Metalinės medžiagos. Lakštai ir juostos. Ištempimo bandymas pagal Erichseną (ISO/DIS 20482:2026)

ISO 20482:2013 specifies a standard test method for determining the ability of metallic sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to undergo plastic deformation in stretch forming. For materials that are thicker and when only narrower strips are available, tools of specified dimensions are provided, in which case subscripts are used, as shown in Table 1.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 61189-5-501:2026 Viešoji apklausa

Komentavimo iki data 2026-11-20

Elektrinių medžiagų, spausdintinių plokščių ir kitų sujungiamųjų darinių bei sąrankų bandymo metodai. 5-501 dalis. Bendrieji medžiagų ir sąrankų bandymo metodai. Litavimo fliusų paviršinės varžos bandymai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60076-1:2026 Viešoji apklausa

Komentavimo iki data 2026-11-29

Galios transformatoriai. 1 dalis. Bendrieji dalykai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-15:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-12-06

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-15 dalis. Ypatingieji reikalavimai, keliami skysčių šildymo prietaisams

This European Standard deals with the safety of electrical appliances for heating liquids for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances. Some appliances in this standard are used for heating food

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 15221-6 Archyvuotas

Komentavimo iki data 2026-10-08

Infrastruktūros valdymas. 6 dalis. Ploto ir erdvės matavimas

This document establishes a common basis for planning and design, area and space management, financial assessment, as well as a tool for benchmarking in the life cycle of the built asset. This document covers area and space measurement for existing owned or leased buildings as well as buildings in state of planning or development. This document establishes a framework to deal with area and space measurement to promote both the entire life cycle information requirements and the digital technologies used by the industry. In addition, it defines clear terms and definitions as well as methods for measuring horizontal areas and volumes in buildings and/or parts of buildings, independent of their function.

Peržiūrėti metaduomenis

prEN 17756 Archyvuotas

Komentavimo iki data 2026-10-17

Trąšos, kalkinimo medžiagos ir inhibitoriai. Chloridų kiekio nustatymas

This document specifies references to methods for the determination of the chloride content in organic fertilizers, organo-mineral fertilizers, inorganic fertilizers, liming materials and inhibitors. This document is applicable to fertilizing product blends where the blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed only of inorganic products, the European Standard for inorganic fertilizers applies. NOTE Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible.

Peržiūrėti metaduomenis

prEN ISO 11666 Viešoji apklausa

Komentavimo iki data 2026-11-12

Neardomoji suvirinimo siūlių kontrolė. Ultragarsinė kontrolė. Priėmimo lygiai (ISO/DIS 11666:2026)

ISO 11666:2018 specifies two ultrasonic acceptance levels known as acceptance level 2 (AL 2) and acceptance level 3 (AL 3) for full penetration welded joints in ferritic steels, which correspond to ISO 5817:2014, quality levels B and C. An acceptance level corresponding to ISO 5817:2014, quality level D is not included in this document, as ultrasonic testing is generally not requested for this weld quality. These acceptance levels are applicable to testing carried out in accordance with ISO 17640. ISO 11666:2018 applies to the testing of full penetration ferritic steel welds, with thicknesses from 8 mm to 100 mm. It can also be used for other types of welds, materials and thicknesses, provided the tests have been performed with necessary consideration of the geometry and acoustic properties of the component, and an adequate sensitivity can be employed to enable the acceptance levels of this document to be applied. The nominal frequency of probes used in this document is between 2 MHz and 5 MHz, unless attenuation or requirements for higher resolution call for other frequencies. It is important to consider the use of these acceptance levels in conjunction with frequencies outside this range carefully.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 1995-3:2025/prA1 Viešoji apklausa

Komentavimo iki data 2026-11-12

Eurokodas 5. Medinių konstrukcijų projektavimas. 3 dalis. Darbų atlikimas

1.1 Scope of EN 1995-3 (1) This document gives minimum requirements for execution of timber structures (buildings and bridges) designed in accordance with EN 1995 (all parts) to ensure that what is built meets the requirements for mechanical resistance, serviceability, durability, and fire performance. (2) This document gives guidance on moisture control during transport to the building site, storage on site, handling on site and erection. (3) This document gives guidance on workmanship and deviation limits during execution. (4) This document assumes that there is an execution specification which states all the specific requirements relevant for the execution of a particular structure. (5) For products covered by a European technical product specification, this document only covers those aspects of fabrication such as cutting, machining and drilling after placement of the product on the market. (6) This document does not cover: a) parts which are not designed according to EN 1995; b) temporary works (such as formwork, scaffolding, propping, shoring, etc.); c) specification, production and conformity of timber members in accordance with European technical product specifications; d) deviation limits for other properties than mechanical resistance, serviceability, durability and fire performance; e) contractual aspects, responsibilities of the various parties, competency requirements or the degree of independence of the personnel undertaking the inspection; f) health and safety requirements during execution. 1.2 Assumptions (1) It is assumed that all relevant provisions of EN 1995 are complied with. (2) It is recognized in this document that areas such as detailed requirements for competence of personnel, and details related to Quality Management are within the competence of the CEN Member States. (3) Before the execution begins on a part of the structure, it is assumed that the following are available on site: — the drawings and specification of that part; — the execution specification. (4) Before the start of the execution, it is assumed that the execution specification has been checked for completeness. (5) It is assumed that previous work (such as foundations) has been inspected and that any work which needs to be done due to deviations from the execution specification has been carried out.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 25178-3 Viešoji apklausa

Komentavimo iki data 2026-11-26

Geometrinės gaminio specifikacijos (GGS). Plotinė paviršiaus tekstūra. 3 dalis. Specifikavimo operatoriai (ISO/DIS 25178-3:2026)

This part of ISO 25178 specifies the complete specification operator for surface texture (scale limited surfaces) by areal methods.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 62148-12:2004/prA2:2026 Viešoji apklausa

Komentavimo iki data 2026-12-06

Skaidulinės optikos aktyvieji komponentai ir įtaisai. Korpusų ir sąsajos įtaisų standartai. 12 dalis. Lazeriniai siųstuvai su bendraaše radijo dažnių jungtimi

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO/IEC 17065 Archyvuotas

Komentavimo iki data 2026-10-12

Atitikties vertinimas. Reikalavimai, keliami produktų, procesų ir paslaugų sertifikavimo įstaigoms (ISO/IEC FDIS 17065:2026)

This document contains requirements for the competence, consistent operation and impartiality of product, process and service certification bodies. Certification bodies operating to this document need not offer all types of products, processes and services certification. Certification of products, processes and services is a third-party conformity assessment activity (see ISO/IEC 17000:2020, 4.5). In this document, the term “product” can be read as “process” or “service”, except in those instances where separate provisions are stated for “processes” or “services” (see Annex B).

Peržiūrėti metaduomenis

EN ISO 683-3:2022/prA1 Viešoji apklausa

Komentavimo iki data 2026-10-27

Termiškai apdorojami plienai, legiruotieji plienai ir automatų plienai. 3 dalis. Cementuojamieji plienai. 1 keitinys (ISO 683-3:2022/DAM 1:2026)

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 15184 Viešoji apklausa

Komentavimo iki data 2026-11-12

Dažai ir lakai. Plėvelės kietumo nustatymas bandant pieštuku (ISO/DIS 15184:2026)

This document specifies a method for determining the film hardness by pushing pencils of known hardness over the film. The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of a multi-coat system. This rapid test has not been found to be useful in comparing the pencil hardness of different coatings. It is more useful in providing relative ratings for a series of coated panels exhibiting significant differences in pencil hardness. The method is applicable only to smooth surfaces.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 1994-1-2:2026/prA1 Viešoji apklausa

Komentavimo iki data 2026-11-19

Eurokodas 4. Kompozitinių plieninių-betoninių konstrukcijų projektavimas. 1-2 dalis. Konstrukcijų elgsenos ugnyje skaičiavimas

(1) EN 1994-1-2 gives rules for the design of steel-concrete composite structures for the accidental design situation of fire exposure. It only identifies differences from, or supplements to, rules for normal temperature design. (2) EN 1994-1-2 only applies to structures, or parts of structures, that are within the scope of EN1994-1-1 and are designed accordingly.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 10205:2024/prA1 Viešoji apklausa

Komentavimo iki data 2026-12-06

Šaltai valcuoti alavuoti gaminiai. Juodoji skarda

This document specifies requirements for blackplate product in the form of coils intended for direct use and mostly for the production of electrolytically zinc coated plate, or coils electrolytically coated with either tin (tinplate) or chromium/chromium oxide (ECCS or ECCS-RC). Blackplate can be a single or double reduced product and is specified in nominal thicknesses that are multiples of 0,005 mm from typical 0,10 mm up to 0,60 mm. This document applies to coils in nominal minimum widths of 600 mm. In addition to this document, the general technical delivery conditions of EN 10021 apply. NOTE Standard width coils for specific uses, e.g. tab stock, can be slit into narrow strip for supply in coil form.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 15182-2 Viešoji apklausa

Komentavimo iki data 2026-12-05

Gesinimo medžiagų purškimo ir pagalbinių gaisro gesinimo operacijų kilnojamoji įranga. Gaisrų gesinimo tarnybų naudojami rankiniai švirkštai. 2 dalis. Keičiamos čiurkšlės PN 16 švirkštai

In addition to the common requirements given in EN 15182 1, this document specifies the specific safety and performance requirements and the corresponding test methods, applicable to hand-held combination branchpipes (nozzles), with a nominal pressure of 16 bar (1,6 MPa) PN 16, with a maximum flow rate up to 1 000 l/min at a reference pressure of 6 bar (0,6 MPa).

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 353-2:2024/prA1 Viešoji apklausa

Komentavimo iki data 2026-10-22

Asmeninė apsaugos nuo kritimo įranga. 2 dalis. Valdomieji kritimo stabdytuvai, įskaitant lanksčiąją inkaravimo vedlinę

This document specifies requirements, test methods, marking, manufacturer’s instructions and information and packaging for guided type fall arresters including a flexible anchor line forming a single product. This anchor line is attached to an upper anchor point for vertical and inclined applications; for horizontal applications, the anchor point can be located at the user’s foot level. Guided type fall arresters including a flexible anchor line conforming to this document are components of one of the fall arrest systems covered by EN 363:2018. Other types of fall arresters are specified in EN 353-1:2014+A1:2017 or EN 360:2023.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 304 620 V1.0.0 (2026-08) Viešoji apklausa

Komentavimo iki data 2026-10-27

Kibernetinis saugumas (CYBER). Kibernetinio atsparumo aktas (CRA). Kibernetinio saugumo reikalavimai, keliami virtualiesiems privatiesiems kompiuterių tinklams

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60255-21:2026 Viešoji apklausa

Komentavimo iki data 2026-11-15

Matavimo relės ir apsauginė įranga. 21 dalis. Atsparumo vibracijoms, smūgiams, sukrėtimams ir seisminiam poveikiui bandymų reikalavimai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 1993-6:2026/prA1 Viešoji apklausa

Komentavimo iki data 2026-11-19

Eurokodas 3. Plieninių konstrukcijų projektavimas. 6 dalis. Kranus laikančios konstrukcijos

1.1 Scope of EN 1993-6 (1) EN 1993-6 provides rules for structural design of crane supporting structures. (2) EN 1993-6 is applicable to crane supporting structures, especially to indoor and outdoor overhead crane runway beams, of: a) overhead travelling cranes, either: — top-mounted cranes; — underslung cranes; b) monorail hoist blocks. NOTE The principles of the design rules can be applied to supporting structures of other types of cranes making due allowance for differences in the crane-induced actions, if exist. For example, the design rules for supporting structures of the cranes listed in (2) assume that the horizontal crane loads occur randomly scattered along the runways in general. This assumption does not apply to other cranes such as travelling wall jib cranes. (3) EN 1993-6 does not apply to the tracks and suspensions of light crane systems conforming to EN 16851, see Figure 1.1. NOTE The standardized tracks and suspensions of light crane systems are considered as parts of the crane. [Figure 1.1 — Light crane system] (4) Additional rules are given for ancillary runway items including crane rails, structural end stops, surge connectors and surge girders and for runway supporting structures. (5) EN 1993-6 does not apply to cranes and all other moving parts. NOTE Provisions for cranes are given in EN 13001 (all parts) in general and for bridge and gantry cranes in EN 15011 in particular. 1.2 Assumptions (1) Unless specifically stated, EN 1990-1, EN 1991 (all parts) and EN 1993-1 (all parts) apply. (2) The design methods given in EN 1993-6 are applicable if — the execution quality and tolerances are as specified in EN 1090-2, and; — the construction materials and products used are as specified in the relevant parts of EN 1993, or in the relevant material and product specifications. (3) Following interfaces between hoisting device and its supporting structure are assumed: a) the top of crane rail for top-mounted cranes; b) the top of flange on which the crane or hoist block operates for underslung cranes and monorail hoist blocks; c) the support points as shown in Figure 1.1 for light crane systems.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 302 099 V2.3.0 (2026-09) Viešoji apklausa

Komentavimo iki data 2026-11-30

Environmental Engineering (EE); Powering of equipment in access network

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 15221-10 Viešoji apklausa

Komentavimo iki data 2026-12-05

Infrastruktūros valdymas. 10 dalis. Pastatų valdymo skaitmeninė transformacija

This document specifies requirements and provides a framework for the digital transformation of Facility Management (FM). It defines the principles, processes and supporting elements for organizations to apply when planning, implementing and improving digitalization within FM. The purpose of this standard is to ensure that FM organizations can adopt digital practices in a consistent and effective manner that improves operational efficiency, enhances decision-making and strengthens resilience. The standard is written as a companion to EN ISO 41001 [5] Facility management — Management systems — Requirements with guidance for use and EN 15221-8 [2] Facility management — Principles and processes. Its role is not to duplicate the management system requirements of EN ISO 41001 [5] or the principles and processes of EN 15221-8 [2], but to provide the digitalization dimension that complements both. NOTE Annex B describes the relationship between this document and other standards. This standard applies broadly. It is relevant to: — organizations of any type, size, or sector engaged in FM; — both in-house FM functions and outsourced FM service providers; — all phases of FM service delivery and the asset life cycle. Certain elements are outside the scope of this document. General FM principles and processes are covered in EN 15221-8 [2], while the management system requirements for FM are addressed by EN ISO 41001 [5]. These exclusions ensure that this document remains focused on digital transformation as a distinct, yet integrated, component of FM.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 17072-1 Viešoji apklausa

Komentavimo iki data 2026-10-29

Oda. Cheminis metalų kiekio nustatymas. 1 dalis. Ekstrahuojamieji metalai (ISO/DIS 17072-1:2026)

This document specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspiration solution and subsequent determination with inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines extractable metals in leather; it is not compound-specific or specific to the oxidation state of the metals. This method is especially suitable for determining the extractable chromium in chromium-tanned leathers.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS