Standartų projektų sąrašas

EN 12153:2023/prA1 Viešoji apklausa

Komentavimo iki data 2026-11-07

Apdarinės sienos. Pralaidumas orui. Bandymo metodas

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure. This document applies to any curtain walling product as defined in EN 13830.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 63485:2026 Viešoji apklausa

Komentavimo iki data 2026-11-15

Intelektinės informacijos užklausos ir pateikimas. Naudojimo informacijos mainų proceso modelis

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 63758-4:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Qi specifikacija. 2.3 versija. 4 dalis. NFC lusto apsauga

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 26782 Viešoji apklausa

Komentavimo iki data 2026-12-12

Anestezijos ir kvėpavimo įranga. Spirometrai per tam tikrą laiko tarpą žmonių iškvepiamam tūriui matuoti (ISO/DIS 26782:2026)

ISO 26782:2009 specifies requirements for spirometers intended for the assessment of pulmonary function in humans weighing more than 10 kg. ISO 26782:2009 applies to spirometers that measure timed forced expired volumes, either as part of an integrated lung function device or as a stand-alone device, irrespective of the measuring method employed.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 8502-9 Viešoji apklausa

Komentavimo iki data 2026-11-05

Plieninio pagrindo paruošimas prieš padengiant dažais ir su jais susijusiais produktais. Tyrimai paviršiaus švarumui vertinti. 9 dalis. Konduktometrinis lauko bandymo metodas vandenyje tirpioms druskoms nustatyti (ISO/DIS 8502‑9:2026)

This document specifies a field method for the assessment of the surface density of various water-soluble salts on steel surfaces, before and/or after surface preparation, by conductometric determination. The individual surface densities of the salt composition like chlorides, sulphates, sodium, etc, cannot be determined by this method. This method assesses only contaminants that forms an electrolyte (ions) when in contact with water. These represent the greater part of the contaminants.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 9360-2 Viešoji apklausa

Komentavimo iki data 2026-10-24

Įkvepiamo oro šildymo ir drėkinimo įtaisai ir kvėpuojamąsias dujas tiekiančių kvėpavimo sistemų filtrai. 2 dalis. Drėgmės nuostolių matavimas (ISO/DIS 9360-2:2026)

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60825-18:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Lazerinių gaminių sauga. 18 dalis. Nukreipiamosios lazerio pluošto sistemos

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 61174:2026 Viešoji apklausa

Komentavimo iki data 2026-12-06

Jūrų navigacinė ir radijo ryšio įranga bei sistemos. Elektroninių žemėlapių vizualizavimo ir informacijos sistema (ECDIS). Veikimo ir eksploatacinių charakteristikų reikalavimai, bandymų metodai ir reikalaujami bandymo rezultatai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-14:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-12-13

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-14 dalis. Ypatingieji reikalavimai, keliami virtuvės aparatams

This European Standard deals with the safety of electric kitchen machines for household and similar purposes, their rated voltage being not more than 250 V including direct current (DC) supplied appliances and battery-operated appliances.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 55016-1-6:2015/prA3 (Frag 4):2026 Viešoji apklausa

Komentavimo iki data 2026-10-25

3 keitinys. 4 fragmentas: NSA

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60335-2-68:2026 Viešoji apklausa

Komentavimo iki data 2026-11-08

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-68 dalis. Ypatingieji reikalavimai, keliami komercinės paskirties purškiamosioms-siurbiamosioms valymo mašinoms

This standard deals with the safety of electrical portable, non-self-propelled motor-operated spray extraction machines with or without attachments and with or without electrical heating elements, intended for commercial indoor use. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - rental services for those machines; - all uses other than normal housekeeping purposes. The following power systems are covered: - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, - battery-operated machines. This standard applies to machines in which the pressure of the employed cleaning agent does not exceed 2,5 MPa, and in which the product of the pressure (in MPa) and the flow of cleaning agent (in litres per minute) does not exceed 100, and in which the temperature of the cleaning agent at the spray nozzle outlet does not exceed 85 °C. This standard does not apply to - vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); - floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); - wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69); - hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series). - machines designed for use in corrosive or explosive environments (dust, vapour or gas); - machines designed for picking up hazardous dusts (as defined in IEC 60335-2-69), inflammable substances, or glowing particles; - machines designed to handle hazardous solvents, such as flammable or explosive liquids;

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 63281-5-1:2026 Viešoji apklausa

Komentavimo iki data 2026-11-03

Krovininių elektrinių vežtuvų su automatizuota vairavimo sistema ir debesijos platformos planavimo sistemos sąsajos reikalavimai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 63758-1-2:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Qi specifikacija. 2.3 versija. 1-2 dalis. Bendrieji dalykai. Aiškinamasis žodynas

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 62228-3:2026 Viešoji apklausa

Komentavimo iki data 2026-12-04

Integriniai grandynai. Siųstuvų-imtuvų EMS įvertinimas. 3 dalis. CAN siųstuvai-imtuvai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 13350 Viešoji apklausa

Komentavimo iki data 2026-11-14

Ventiliatoriai. Srovinių ventiliatorių eksploatacinių charakteristikų bandymai laboratorijoje (ISO/DIS 13350:2025)

ISO 13350:2015 deals with the determination of those technical characteristics needed to describe all aspects of the performance of jet fans as defined in ISO 13349. It does not cover those fans designed for ducted applications, nor those designed solely for air circulation, e.g. ceiling fans and table fans. The test procedures described in this International Standard relate to laboratory conditions. The measurement of performance under on-site conditions is not included.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 8502-2 Archyvuotas

Komentavimo iki data 2026-10-17

Plieninio pagrindo paruošimas prieš padengiant dažais ir su jais susijusiais produktais. Tyrimai paviršiaus švarumui įvertinti. 2 dalis. Vandenyje tirpių teršalų ekstrahavimas analizei nuvalius tamponu (ISO/DIS 8502‑2:2026)

ISO 8502-2:2017 describes a method for the determination of chloride-containing salts that are readily soluble in water and are present on a steel surface. The method is also applicable to previously coated surfaces. ISO 8502-2:2017 includes a method, applicable in the field or in the laboratory, for washing off the surface while several methods are referred to for chloride analyses.

Peržiūrėti metaduomenis

prEN IEC 60335-2-69:2026/prAA:2026 Viešoji apklausa

Komentavimo iki data 2026-11-08

Buitiniai ir panašios paskirties elektriniai prietaisai. Sauga. 2-69 dalis. Ypatingieji reikalavimai, keliami komercinės paskirties drėgnojo ir sausojo valymo dulkių siurbliams, įskaitant variklinius šepečius

This standard deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. These machines may be provided with a blowing or inflating function. The inner diameter of the dust container connector to the suction hose shall not exceed 200 mm. It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system. Attention is drawn to the fact that additional requirements on the safe installation of centrally-sited vacuum cleaners are not addressed by this standard but need to be taken into account. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: – public use areas such as hotels, schools, hospitals; – industrial locations, for example factories and manufacturing shops; – retail outlets, for example shops and supermarkets; – business premises, for example offices and banks; – all uses other than normal housekeeping purposes. These machines are not equipped with a traction drive. The following power systems are covered: – mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, – battery-operated motors. This standard also applies to machines handling hazardous dust, such as asbestos, and combustible dust in other than an explosive dust atmosphere. Additional requirements for machines handling hazardous dust are given in normative Annex AA. Attention is drawn to the fact that in many countries additional requirements on hazardous substances might apply. Radioactive substances are not covered by definition of hazardous dust for the purposes of this standard. This standard does not apply to – vacuum cleaners and water-suction cleaning appliances for household use (IEC 60335-2-2); – floor treatment machines for commercial use (IEC 60335-2-67, IEC 60335-2-72); – spray extraction machines for commercial use (IEC 60335-2-68); IEC 60335-2-67 and IEC 60335-2-68 cover only machines without traction drive. – hand-held mains-operated electrical garden blowers, vacuums and blower vacuums (IEC 60335-2-100); – hand-held and transportable motor-operated electric tools (IEC 60745 series, IEC 61029 series, IEC 62841 series); – appliances for medical purposes (IEC 60601-1); – machines designed for use in corrosive environments; – machines designed for picking up liquids with a flash point below 55 °C; – machines designed for use in explosive environments (dust, vapour or gas), except those designed for use in zone 22; – machines intended to vacuum ash from fireplaces, chimneys, ovens, ashtrays and similar places of ash accumulation.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN IEC 61000-6-3/prA1:2026 Viešoji apklausa

Komentavimo iki data 2026-11-15

Elektromagnetinis suderinamumas (EMS). 6-3 dalis. Bendrieji standartai. Spinduliavimo standartas, skirtas gyvenamojoje aplinkoje naudojamai įrangai. 1 keitinys

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 18082 Viešoji apklausa

Komentavimo iki data 2026-11-26

Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases (ISO/DIS 18082:2026)

ISO 18082:2014 specifies the dimensions, the allocation and marking of non-interchangeable screw-threaded (NIST) connectors intended to be used at operating pressures up to 1 400 kPa, and for vacuum systems at pressures not greater than 60 kPa absolute. ISO 18082:2014 specifies NIST connectors intended for use with the following medical gases: oxygen; nitrous oxide; medical air; helium; carbon dioxide; xenon; specified mixtures of the gases listed above; oxygen-enriched air; air for driving surgical tools; nitrogen for driving surgical tools; use with vacuum.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

ISO/DIS 37011 Viešoji apklausa

Komentavimo iki data 2026-11-30

Tikslo siekimu grindžiama organizacijų veikla. Nurodymai

This document provides guidance on organizational purpose and governance of purpose-driven organizations - organizations that seek to align their decision-making and actions with the long-term wellbeing of all people and the planet. This document provides guidance to governing bodies on consciously directing, overseeing and accounting for how they govern their organizations so that it is purpose-driven. It is also intended to be relevant to stakeholders who provide services and support to organizations, or who invest in them, support them and help hold them to account for their purpose-driven commitments. It covers the worldviews, practices and behaviours of purpose-driven organizations and those that govern and influence them. This document is applicable to organizations of all types and sizes. This document does not provide guidance on organizational transformation processes.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 61010-2-033:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Saugos reikalavimai, keliami elektrinei matavimo, valdymo ir laboratorinei įrangai. 2-033 dalis. Ypatingieji reikalavimai, keliami buitinės ir profesinės paskirties rankiniams multimetrams ir kitokiems tinklo įtampos matuokliams

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 2593-001 Viešoji apklausa

Komentavimo iki data 2026-10-31

Aerospace series — Bases for 10 A electromagnetic plug-in relays, two and four poles double thrown — Part 001: Technical specification

The present document specifies the characteristics, installation and mounting dimensions for plug-in relay bases for use with two and four poles double throw relays in accordance with EN 2548-001. Relay bases in accordance with this document shall be used at ambient temperatures between −70 °C and 125 °C and at altitudes up to 25 000 m.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 21037 Viešoji apklausa

Komentavimo iki data 2026-10-24

Klijai. Klijuotinių jungčių atskyrimo, leidžiančio taisymą ir pagerinančio perdirbimą, gairės (ISO 21037:2026)

This document specifies the methods commonly available for separating adhesively bonded joints enabling repair and improving recycling. This document applies to adherends made of metallic and non-metallic inorganic material, plastics including both filler-containing and fibre-reinforced types, wood and wood-based materials, coated materials, adherends of natural and polymeric fibres as well as paper and cardboard.

Peržiūrėti metaduomenis

EN IEC 60269-1:2025/prA1:2026 Viešoji apklausa

Komentavimo iki data 2026-11-22

Žemosios įtampos saugikliai. 1 dalis. Bendrieji reikalavimai

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN IEC 60076-2:2026 Viešoji apklausa

Komentavimo iki data 2026-11-29

Galios transformatoriai. 2 dalis. Skystinių transformatorių įšilimas

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS