Standartų projektų sąrašas

prEN ISO 25178-607 Viešoji apklausa

Komentavimo iki data 2026-12-17

Geometrinės gaminio specifikacijos (GPS). Plotinė paviršiaus tekstūra. 607 dalis. Nesąlytinių (konfokalinės mikroskopijos) matuoklių nominaliosios charakteristikos (ISO/DIS 25178-607:2026)

This document describes the influence quantities and instrument characteristics of confocal microscopy systems for areal measurement of surface topography. Because surface profiles can be extracted from surface topography images, the methods described in this document can be applied to profiling measurements as well.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 17082 Viešoji apklausa

Komentavimo iki data 2026-12-17

Ne didesnės kaip 300 kW grynosios tiekiamosios šiluminės galios buitiniai ir nebuitiniai dujiniai priverstinės konvekcijos patalpų oro šildytuvai

This document specifies the requirements and test methods for the safety and efficiency of gas fired air heaters with or without a fan to assist the transportation of combustion air and/or flue gases. This document also applies to warm air heaters having forced draught burners. This document applies to Type A2, A3 appliances, with an input not exceeding 300 kW (net CV basis), intended for non-domestic use. This document also applies to Type B11, B11AS, B11BS, B12, B12AS, B12BS, B13, B13AS, B13BS, B14, B14AS, B14BS, B22, B23, B41, B41AS, B41BS, B42, B42AS, B42BS, B43, B43AS, B43BS, B44, B44AS, B44BS, B52, B53, C11, C12, C13, C21, C31, C32, C33, C41, C52, C53, C62 and C63 appliances with an input not exceeding 300 kW (net CV basis), intended for domestic and non-domestic use. The heated air can be delivered by means of ducting. This document applies only to appliances using the gaseous fuels of the second and third families as defined in EN 437. For second family gases, this includes H2NG blends containing up to 20 % hydrogen by volume, where the appliance is marked with the appropriate extended category (e.g. I2H, I2E, I2E(Y20)). This document does not apply to appliances intended to burn gases containing carbon monoxide or other toxic components. This document does not apply to: a) dual purpose air conditioning appliances (heating and cooling); b) appliances where the air is heated by an intermediate fluid; c) portable or transportable forced convection appliances; d) appliances fitted with manual or automatic means of adjusting the combustion products evacuation by means of flue dampers; e) appliances having multiple heating units with a single draught diverter; f) appliances fitted with more than one flue outlet; g) appliances fitted with gas boosters; h) C21 and C41 appliances for 3rd family gases. NOTE 1 Appliance Types (A, B and C) are classified in accordance with EN 1749. NOTE 2 For C41 appliances, see all requirements and test methods that are valid for C21 appliances, unless otherwise stated.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 13814-1 Viešoji apklausa

Komentavimo iki data 2026-12-17

Atrakcionų įrenginių ir įtaisų sauga. 1 dalis. Projektavimas ir gamyba

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document. For all the equipment not covered by the requirements of EN 13814 1, the relevant standards apply. Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein. In terms of workers’ health and safety, national regulations apply. This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 13814-2 Viešoji apklausa

Komentavimo iki data 2026-12-17

Atrakcionų įrenginių ir įtaisų sauga. 2 dalis. Eksploatavimas, techninė priežiūra ir naudojimas

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document. In terms of workers’ health and safety, national regulations apply.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 13814-3 Viešoji apklausa

Komentavimo iki data 2026-12-17

Atrakcionų įrenginių ir įtaisų sauga. 3 dalis. Tikrinimo projektuojant, gaminant, eksploatuojant ir naudojant reikalavimai

This part of EN 13814 defines requirements for the necessary independent inspections of amusement devices designed, manufactured, operated and used according to EN 13814 1:2019 and EN 13814 2:2019.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 1366-1 Viešoji apklausa

Komentavimo iki data 2026-12-12

Inžinerinių tinklų įrenginių atsparumo ugniai bandymai. 1 dalis. Kanalai

This document specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including ancillary items such as access panels, attenuators, compensators and control dampers, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This document is used in conjunction with EN 1363-1. Annex A provides general guidance and gives background information. This document is not applicable to: a) ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall (where ducts are located in cavities enclosed by fire-resistant shafts or ceilings); b) ducts containing fire dampers at points where they pass through fire separations; c) one, two or three sided ducts; d) fixing of suspension devices (e.g. anchors) to floors or walls.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12903 Viešoji apklausa

Komentavimo iki data 2026-12-20

Produktai žmonėms vartoti skirtam vandeniui ruošti. Aktyvintųjų anglių milteliai

This European Standard is applicable to powdered activated carbon used for treatment of water intended for human consumption. It describes the characteristics of powdered activated carbon and specifies the requirements and the corresponding test methods for powdered activated carbon. It gives information on its use in water treatment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12907 Viešoji apklausa

Komentavimo iki data 2026-12-20

Produktai žmonėms vartoti skirtam vandeniui ruošti. Pirolizuotos anglys

This European Standard is applicable to pyrolyzed coal material used for treatment of water intended for human consumption. It describes the characteristics of pyrolyzed coal material and specifies the requirements and the corresponding test methods for pyrolyzed coal material. It gives information on its use in water treatment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 12904 Viešoji apklausa

Komentavimo iki data 2026-12-20

Produktai žmonėms vartoti skirtam vandeniui ruošti. Kvarcinis smėlis ir kvarcinis žvyras

This document is applicable to silica sand and silica gravel used for treatment of water intended for human consumption. It describes the characteristics of silica sand and silica gravel and specifies the requirements and the corresponding test methods for silica sand and silica gravel. It gives information on their use in water treatment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 18287 Viešoji apklausa

Komentavimo iki data 2026-12-12

Dirbtinis intelektas. Dirbtinio intelekto sistemų ir paslaugų poveikio aplinkai įvertinimo reikalavimai ir nurodymai

This document specifies requirements, guidance and metrics for environmental impact evaluation of artificial intelligence systems and services and gives guidance on impact reduction throughout its Life cycle. This document establishes requirements and guidance on reporting and communicating about the environmental impact of AI. This document also provides techniques to evaluate potential indirect negative or positive consequences of AI systems and services, for stakeholders to anticipate or mitigate them. This document is applicable to the entire Life cycle of AI systems and services, from inception to end-of-life. This document is applicable to LCA practitioners conducting life-cycle analyses for AI systems or AI services, organizations developing and using AI systems or AI services (AI providers and deployers), and all actors in the value chain.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 472-3 Viešoji apklausa

Komentavimo iki data 2026-12-12

Plastikai. Aiškinamasis žodynas. 3 dalis. Plastikų suvirinimas ir šiluminis sujungimas (ISO/DIS 472‑3:2026)

The ISO 472 series defines terms used in the plastics industry, including terms and definitions appearing in the plastics standards of ISO/TC 61 and general terms and definitions of polymer science used in all aspects of plastics technology. This document defines terms used in the plastics standards of ISO TC61/SC11 Plastics Products and relevant terms applied in the area of welding (including solvent welding) and thermal staking.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 24466 Viešoji apklausa

Komentavimo iki data 2026-12-12

Odontologija. Vienatūrio implanto ar implanto korpuso dalių ir matmenų žymenys (ISO/DIS 24466:2026)

This document defines the general labelling information required by the clinician for the selection of a suitable dental implant for the surgical procedure. This document designates the terms for the parts of an implant body or a monopart implant that are used in oral implantology and specifies the dimensions and their data on the packaging of a dental implant. This document does not apply to non-root form implants such as zygomatic implants or subperiosteal implants.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 13606-5 Viešoji apklausa

Komentavimo iki data 2026-12-12

Sveikatos informatika. Elektroninių sveikatos įrašų perdavimas. 5 dalis. Sąsajos specifikacija (ISO/DIS 13606-5:2026)

This document specifies the information architecture required for interoperable communications between systems and services that need or provide EHR data. This document is not intended to specify the internal architecture or database design of such systems. The subject of the record or record extract to be communicated is an individual person, and the scope of the communication is predominantly with respect to that person's care. Uses of healthcare records for other purposes such as administration, management, research and epidemiology, which require aggregations of individual people's records, are not the focus of this document but such secondary uses could also find the document useful. This document defines a set of interfaces to request and provide: — an EHR_EXTRACT for a given subject of care as defined in ISO 13606-1; — one or more ARCHETYPE(s) as defined in ISO 13606-2; — an EHR_AUDIT_LOG_EXTRACT for a given subject of care as defined in ISO 13606-4. This document defines the set of interactions to request each of these artefacts, and to provide the data to the requesting party or to decline the request. An interface to query an EHR or populations of EHRs, for example for clinical audit or research, are beyond its scope, although provision is made for certain selection criteria to be specified when requesting an EHR_EXTRACT which might also serve for population queries. This document defines the Computational Viewpoint for each interface, without specifying or restricting particular engineering approaches to implementing these as messages or as service interfaces. This document effectively defines the payload to be communicated at each interface. It does not specify the particular information that different transport protocols will additionally require, nor the security or authentication procedures that might be agreed between the communicating parties or required by different jurisdictions.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 26782 Viešoji apklausa

Komentavimo iki data 2026-12-12

Anestezijos ir kvėpavimo įranga. Spirometrai per tam tikrą laiko tarpą žmonių iškvepiamam tūriui matuoti (ISO/DIS 26782:2026)

ISO 26782:2009 specifies requirements for spirometers intended for the assessment of pulmonary function in humans weighing more than 10 kg. ISO 26782:2009 applies to spirometers that measure timed forced expired volumes, either as part of an integrated lung function device or as a stand-alone device, irrespective of the measuring method employed.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 21043-2 Viešoji apklausa

Komentavimo iki data 2026-12-12

Teismo ekspertizė. 2 dalis. Teismo ekspertizės proceso ir ekspertizės objektų gavimo bei tvarkymo bendrieji reikalavimai (ISO/DIS 21043-2:2026)

This document specifies general requirements and recommendations for the operation of the forensic service provider. These apply throughout the forensic process, both at a scene and within a facility. This document also contains requirements and provides recommendations for the recovery and management of items. These requirements and recommendations are designed to ensure that: — items are preserved; — personnel are competent; — equipment and consumables are suitable; — health and safety risks are mitigated. This document is applicable to all areas of expertise of forensic science; however, it is not applicable to the recovery of digital data, which is covered by ISO/IEC 27037.[1] The storage medium itself can yield additional items (e.g. fingermarks or DNA) which would be covered by this document.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 13943 Viešoji apklausa

Komentavimo iki data 2026-12-12

Gaisrinė sauga. Aiškinamasis žodynas (ISO/DIS 13943:2026)

This document defines terminology relating to fire safety as used in ISO and IEC International Standards.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 16641 Viešoji apklausa

Komentavimo iki data 2026-12-10

Tekstilinės grindų dangos. Priimtinų spalvos nuokrypių gairės

This document gives guidance in case of complaints when a colour deviation is observed before or after installation of a textile floor covering by the installer and/or end user. The colour deviation can be observed within different parts of the installation or between the installed textile floor covering and the initially presented reference sample of the manufacturer on which the choice for ordering was made.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 1015-18 Viešoji apklausa

Komentavimo iki data 2026-12-10

Mūro skiedinio bandymo metodai. 18 dalis. Sukietėjusio skiedinio kapiliarinio vandens įgėrio koeficiento nustatymas

This document specifies a method for determining the water absorption coefficient due to capillary action of hardened mortars containing mineral binders and normal, recycled and as well as light weight aggregates.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN 81-72 Viešoji apklausa

Komentavimo iki data 2026-12-10

Liftų konstravimo ir įrengimo saugos taisyklės. Specialusis keleivinių ir krovininių-keleivinių liftų pritaikymas. 72 dalis. Ugniagesių liftai

1.1 This document specifies the additional requirements to EN ISO 8100-1:2026 for new passenger and goods passenger lifts, which can be used to support firefighting and rescue under firefighters control. 1.2 This document does not apply to: - lifts for evacuation due to circumstances which introduce other hazards such as explosion threat, chemical or biological attack, flooding, storm damage, or earthquake. In these cases, this document can be used as a basis with further measures as required from risk assessment; - the provision of evacuation aids to assist when the evacuation lift is unavailable; - lifts with partially enclosed wells; - lifts installed in new or existing buildings, which are not included in fire resisting building structure. 1.3 This document does not define the use of other than the highest deck of a multi deck lift for firefighting operations. 1.4 The significant hazards covered by this document are listed in Annex H. 1.5 The following significant hazards are out of the scope of this document: - fire or smoke in the firefighters lift well, safe areas, machinery spaces or car; - ingress of water to the lift well during firefighting operations; - insufficient or incorrectly located firefighters lifts; - insufficient firefighters lift capacity; - inability of users to understand the use of the lift in firefighting operations; - entrapment in waiting area (safe area) due to absence of lift service or adjacent stairs; - structural collapse or failure of building services (including public supply network, lighting, ventilation) before the firefighting using lifts has been completed; - presence of harmful gases, potentially explosive atmosphere, extreme climate conditions, transport of dangerous goods; - unavailability of the firefighters lift. This document is not applicable to firefighters lifts manufactured before the date of its publication.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

EN 17476:2021+A1:2022/prA2 Viešoji apklausa

Komentavimo iki data 2026-12-10

Suskystintas naftos dujas naudojančių prietaisų techniniai reikalavimai. Prietaisai su horizontaliai į korpusą įdedamais balionais, naudojantys garų slėgio SND

This document specifies the construction characteristics, performances and marking related to safety and the rational use of energy of portable, flat gas appliances directly supplied at the LPG vapour pressure, incorporating a gas cartridge complying with EN 417:2012, inserted horizontally in the chassis. NOTE 1 These appliances are referred to in the body of the text as “appliances”. This document covers appliances for outdoor or in well ventilated areas uses only. This document does not cover appliances supplied by an external gas source. For example, the following types of appliances are covered: a) cooking appliances (stoves, barbecues); b) heating appliances. This document specifies the requirements applicable to these appliances or their functional sections whether or not the latter are independent or incorporated into an assembly. Appliances covered by this document are not connected to a flue for the discharge of products of combustion and are not connected to the mains electricity supply. This document covers neither appliances supplied with LPG in the liquid phase nor appliance with fixed integral container which could be refilled by the user. This document does not cover appliances of direct pressure propane category. Requirements for rational use of energy have been considered for stove burners. NOTE 2 However, such requirements have not been considered for the other types of appliances because: - for barbecues, this type of cooking varies according to the type of food and region where the appliance is used; - for heating appliances, all the heat produced is discharged into the environment.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO/IEC 2382-37 Viešoji apklausa

Komentavimo iki data 2026-12-10

Informacinės technologijos. Aiškinamasis žodynas. 37 dalis. Biometrija (ISO/IEC DIS 2382-37:2026)

This document establishes a systematic description of the concepts in the field of biometrics pertaining to recognition of human beings. This document also reconciles variant terms in use in pre-existing International Standards on biometrics against the preferred terms, thereby clarifying the use of terms in this field. This document does not cover concepts (represented by terms) from information technology, pattern recognition, biology, mathematics, etc. Biometrics uses such fields of knowledge as a basis. In principle, mode-specific terms are outside of scope of this document.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-3 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvų reikalavimai. 3 dalis. Krūmų ir medžių purkštuvai (ISO/DIS 16119-3:2026)

This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254 6). • Scope out liquid fertilizer application • Adding Part 5 - Aerial sprayers • Instruction handbook content • Annex A, table with techniques needs to be updated. • Additional standards for application equipment listed in Annex A and covered by mandate M435 and M471 of the EC shall be developed.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-4 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvams keliami reikalavimai. 4 dalis. Stacionarieji ir pusiau stacionarūs purkštuvai (ISO/DIS 16119-4:2026)

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of fixed and semi-mobile sprayers, as defined in 3.1 and 3.2, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. This type of spraying system is generally a combination of separate elements (main tank, pump and application unit) that can be assembled in fixed installations (fixed sprayers) or with moving parts (semi-mobile sprayers). It does not apply to application equipment for space/spatial treatments. It is intended to be used with ISO 16119 1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those stated in ISO 16119 1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119 1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254 6). • Filling - Total tank extra volume • Quick coupler for CTS + mandatory provision of inductor hopper or CTS • Filters drain valve • Digital level indicator + accuracy • Pump requirements as per ISO 12908: 2020 • Residue concentration only one method for system rinsing

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-2 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvų reikalavimai. 2 dalis. Purkštuvai su horizontaliuoju skirstomuoju vamzdžiu (ISO/DIS 16119-2:2026)

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is intended to be used with ISO 16119 1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119 1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119 1 for machines within the scope of this part of ISO 16119. It does not cover safety aspects (see ISO 4254 6). • Define and specify requirements for ‘Modules’ • Filling -Total tank extra volume • Quick coupler for CTS + mandatory provision of inductor hopper or CTS • Filters drain valve • Digital level indicator + accuracy • Boom automatic section control (>24 m) + ISOBUS task controller • Boom nozzle spacing equal location • Pump requirements as per ISO 12908: 2020 • Residue concentration only one method for system rinsing • Direct injection definition, requirements, test method

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

prEN ISO 16119-1 Viešoji apklausa

Komentavimo iki data 2026-12-10

Žemės ir miškų ūkio mašinos. Aplinkosauginiai purkštuvų reikalavimai. 1 dalis. Bendrieji dalykai (ISO/DIS 16119-1:2026)

This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254 6). • Scope out liquid fertilizer application • Adding Part 5 - Aerial sprayers • Instruction handbook content • Annex A, table with techniques needs to be updated. • Additional standards for application equipment listed in Annex A and covered by mandate M435 and M471 of the EC shall be developed.

Skaityti, komentuoti projektą Peržiūrėti metaduomenis

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS

Būtini slapukai

Statistikos slapukai

El. pašto prenumerata

Standartų projektų sąrašas

Išplėstinė paieška

Rezultatai

Greitieji filtrai

Organizacija

Technikos komitetas

ICS